jet fuel

(redirected from A1 jet fuel)

jet fuel

[′jet ¦fyül]
(materials)
Special grade of kerosine with a flash point of 125°F (52°C), used for jet aircraft; may have methane or naphthene added to produce a 110°F (43°C) flash point, for military aircraft.

Jet Fuel

 

the fuel used in jet aircraft engines. The most common jet fuels are kerosine fractions obtained by straight-run distillation of low-sulfur and high-sulfur crude oils; examples of these fuels are the domestic jet fuels T-l (from low-sulphur crude oil) and TS-1 (from high-sulphur crude oil). Fuels with high thermal stability, such as the domestic fuel RT and the foreign fuels A, A-l, and B, are manufactured by hydrofining fractions derived from straight-run distillation. Other components used in the production of jet fuels are obtained by hydrocracking and the removal or conversion of mercaptans.

The most important properties of a jet fuel are its density and heat of combustion (see Table 1), which determine the flight range. A jet fuel should have high thermal stability, particularly if it is to be used in supersonic aircraft, where the temperature of the fuel in the tanks may exceed 150°-200°C. High thermal stability is attained by removing nonhydrocarbon impurities, such as sulfur, nitrogen, and oxygen compounds, from the fuel, for instance, by hydrogenation. Such processing (seeREFINING OF PETROLEUM PRODUCTS) also ensures that the jet fuel will have low corrosiveness.

In order to improve the stability of refined fuels during storage, antioxidants (up to 24 mg/liter) and additives to deactivate metals (6 milliliters/liter) are used. Jet fuels contain dissolved water (up to 0.008–0.01 percent at normal temperatures), which can separate from the fuel as conditions change, causing electrochemical corrosion in the fuel system or the formation of ice crystals. For this reason, corrosion inhibitors (10–45 mg/liter) and deicing additives (0.1–0.3 percent by volume) are used. Other additives prevent the accumulation of static electricity and improve the wear-inhibiting qualities of the fuel.

Table 1. Basic physical and chemical characteristics of jet fuels manufactured in the USSR
CharacteristicGrade of fuel
T-1TS-1Thermally stable
RTT-6
*10,250 kilocalories/kg †10,300 kilocalories/kg
Density at 20°C (kg/m3)≥800≥775≥775≥840
Fractional composition:    
10% distilled at (°C)≤175°≤165°≤175°≤195°
98% distilled at (°C)≤280°≤250°≤280°≤315°
Minimum heat ofcombustion (kilojoules/kg) … .≥43,050*≥43,050*≥43,260†≥43,260†
Onset of crystallization (°C)≤–60°≤–60°≤–60°≤–60°
Total sulfur content (%) .≤0.10≤0.25≤0.10≤0.05
Mercaotan sulfur content (%)≤0.005≤0.001

REFERENCES

Nefteprodukty. Edited by B. V. Losikov. Moscow, 1966. Zrelov, V. N., and V. A. Piskunov. Reaktivnye dvigateli i toplivo. Moscow, 1968.
Zarubezhnye topliva, masla iprisadki. Edited by I. V. Rozhkov and B. V. Losikov. Moscow, 1971.

I. V. ROZHKOV

jet fuel

Fuels designed for use in gas turbine engines.
References in periodicals archive ?
Contract award: framework agreements jet a1 jet fuel supply civle airports.
An Icelandic company called Arctic Trucks converted the vehicles for the trip by adding extra heaters and converting the engines to run on Jet A1 jet fuel (which can be used at sub-zero temperatures without waxing).
In December 2008, one engine of an Air New Zealand 747 was powered by a fifty-fifty blend of jatropha plant oil and standard A1 jet fuel.
The Purpose of this framework agreement is the supply of jet fuel JET A1 jet fuel types (standard 3405 D) and gasoline AVGAS 100 LL (AIR 3401 standard I), tanks aboard deliveries for the fleet of aircraft operated by the National School Civil Aviation (ENAC).
One engine of a Boeing 747-400 had a 50-50 blend of oil from jatropha plants and standard A1 jet fuel.