band-pass filter

(redirected from Band pass filter)
Also found in: Dictionary, Medical, Wikipedia.
Related to Band pass filter: Band stop filter

band-pass filter

See filter.

band-pass filter

[′band ‚pas ‚fil·tər]
(electronics)
An electric filter which transmits more or less uniformly in a certain band, outside of which the frequency components are attenuated.
References in periodicals archive ?
The Sacchi's algorithm (2002) based on the Karhunen-Loeve (K-L) Transform was modified and implemented to suppress Ground Roll without distortion of the reflection signals, it provided better results than conventional techniques for noise removal like f-k, High-Pass and Band Pass Filters.
1) Via fences at very high frequencies behave as band pass filters and the via-to-via spacing controls the pass band poles and thereby the cut of frequency of the filter.
Electronic band pass filter rejects the noise at higher and lower frequency and hence significantly improves the signal to noise ratio.
This setback was attributed to either an impedance match problem between the mixer and amplifying stage, the band pass filter we are using towards the end of the hardware stage, or getting Pspice to work correctly.
The ideal band pass filter requires a moving average of infinite order which can only be implemented when there is an infinite amount of data.
The new BPF-C Band Pass Filter will reject frequencies outside the range of 3.
Paratek is now shipping low loss, high performance tunable band pass filter evaluation kits based upon Paratek's tunable RF technology.
The WLAN6102 has a high level of integration with more than a dozen components designed into the substrate including critical components such as RF matching, band pass filter and balun.
The CW1260 will also use two other ST IPD products, a 5GHz band pass filter and a matched balun (a signal-transforming device).
SAN DIEGO -- Company's High-Frequency Design Capability Drives Development of Miniaturized UWB Band Pass Filter and Balun in Standard Case Sizes for Better Mounting Efficiency
Technical Specification Summary Part Number TC90101FG Process Technology CMOS Input Interface CVBS, Y/C, YCbCr (525i, 525p, 625i, and 625p) A/D Converters 10-bit and two 8-bit Channels Y/C Separation 3-Line Comb Filter (NTSC/PAL), Band Pass Filter (SECAM) Component Signal Frequency Detection 525i, 525p, 625i and 625p Picture Improvement Functions Y: Vertical Enhance, LTI, Contrast, Brightness, Sharpness, Noise Reduction C: ACC, Color Killer, Hue, Color Gain, CTI, Offset Adjust Color Decoder Multi-Standard (NTSC/PAL/SECAM) VBI Data Slicer CGMS-A (525i, 525p), CCD, WSS Features S/N Detection, Macrovision Detection Output Interface ITUR-601, 656 Serial Interface I2C Bus Power Supply 1.