Base coat

Base coat

The first coat of plaster finish, typically composed of lime, cement, and sand; the first layer of any coating applied in a liquid or plastic state, such as paint.

base coat

1. All plaster applied before the finish coat; may be a single coat or a scratch coat and a brown coat.
2. The first coat applied to a surface, as paint; a prime coat.
3. An initial coat applied to a wood surface before staining or otherwise finishing it.
References in periodicals archive ?
You get a K Rend base coat and then apply a top coat, which can be any colour you want.
8,999,308 B2; Coty Germany has patented a base and a top coat in which the anhydrous base coat composition consists of a water absorbent compound which is a cosmetically acceptable salt of acrylic or polyacrylic acid, a CO2 releasing compound which is an inorganic or organic carbonate, or bicarbonate, a solvent for the water absorbent compound and the CO2 releasing compound, a wax, auxiliary substances which do not encompass surfactants and optionally, a second water absorbent compound selected from the group consisting of cellulose gum, polysaccharides, natural gums, clays, aluminum silicate, bentonite, aluminum starch octenylsuccinate, acrylic acid and polyacrylic acid.
03 Apply base coat twice to prevent the sun from leaving nails with a yelA[degrees] low tint.
Base coat plaster, silicate-based support, 30 x 30 cm 31 mA,
Our testers whiten their tips: Revlon Nail Brightener Base Coat, PS7.
You can skip the base coat if you're using a light, sheer polish like this as it won't stain your nails.
Next, prep nails with a base (we're obsessing over CND's Stickey Anchoring Base Coat, $9, ulta.
The new product, which is targeted at the residential market, is a water-based pearlescent interior finish, consisting of a coloured base coat and a special selected pearlescent powder to create the effect desired.
1 For brittle nails: Jessica Recovery Base Coat, pounds 10.
IdeaPaint's new BASE coat product creates the highest quality foundation for IdeaPaint projects and optimizes the performance of all IdeaPaint dry-erase coatings
The Hybri-Flex Series M floor system from Dur-A-Flex incorporates a base coat that offers superior bonding, often eliminating the need for a primer coat.
Sancon 100 is a two-stage protective coating system that uses a moisture tolerant 100 percent solids epoxy base coat and a 100 percent solids high build polyurethane elastomer top coat.