In benchtop test using 5CE7mm porcine carotids that compared median burst pressure
for HARMONIC ACE+7 (1419 mmHg) and LigaSure(TM) 5mm Blunt Tip (591 mmHg) (p< 0.
Preform reheat unit Burst pressure
Expansion set-temperature (kPa) (ml) ([degrees]C) 105 1406 [+ or -] 124 411 [+ or -] 92 110 1358 [+ or -] 14 435 [+ or -] 44 115 1234 [+ or -] 27 510 [+ or -] 66
The parameters reflecting combustion phase include maximum burst pressure
angle, maximum pressure rising rate angle and 50% MFB angle.
The pipeline industry has traditionally used the NG-18 equation to estimate burst pressure
and critical flaw size.
The designer must consider how the burst pressure
changes with respect to the geometry and the materials.
1 times the maximum expected operating pressure (MEOP), and a burst pressure
proof test of 1.
8220;The CV-S vent is designed to support robust cycling and applications where the operating pressure approaches the burst pressure
, or where moderate vacuum pressure exists,” explained Stephen Clegg, Fike's Industrial Protection Product Specialist.
Tolerance confirmation of burst pressure
in GB567-1999 "Rupture Disk and Rupture Disk Equipments":9.
of six test pipes in ksig Defective pipe, Defective pipe with Defective pipe with unrestrained burst Xhab[TM], unrestrained Xhab[TM], restrained burst burst A 0.
While for ducts the most important parameters to consider are the absolute displacements (internal pressure) and/or the collapse pressure (external pressure), the most important parameters to determine when considering the design of tubes is the maximum working pressure (MWP), determined from the minimum burst pressure
Analysis of the joining-velocity profile curve versus test data on the resulting weld strength, burst pressure
, and part appearance helps the process engineer adjust welding amplitude and force.
With the low growth non-compliant balloon material, OptiLiance(TM), the NC Mercury delivers flat compliance characteristics with high rate of burst pressure
(up to 20 bar) for 2.