Casting Mold

Casting Mold

 

a mold used in the foundry industry for the production of castings. Molten metal or stone is poured into such molds. Materials used for making molds are quartz sand, bento-nite, clay, and metals.

References in periodicals archive ?
Among specific topics are recovering valuable metals from copper slag by hydrometallurgy, fluid flow in a large round bloom continuous casting mold, the kinetics of pressure acid leaching of zinc from zinc silicate ore, cost optimization of pig iron, a large-scale rotary steam tube drying system and equipment for copper powder, permeability characteristics of soft coal under higher confining pressure, virtual simulation of the ground scene of the mining area, and a technique to measure a metal tank's oil temperature and level.
CMT also will demonstrate use of its Hyvac material to create a quick and easy hold-down fixture for trimming and QC inspection simply by using an existing formed part as a casting mold.
Starting from experimental data analysis to establish a mathematical model able to describe the dependence of dimensional accuracy of parts and temperature respectively wax casting mold temperatures.
When molten metal is poured onto the surface of a rotating centrifugal casting mold, all of it is not picked up (accelerated) immediately.
and Emi (Institute of Research of Iron and Steel, China) concentrate on the role of the tundish, the last vessel through which molten metal flows before solidifying in the continuous casting mold.
By virtue of such a process, the profile of the laminated mold on the side of the tire stepping side can be formed quite the same with that of the tire as originally intended, and as a result the tire, which has both of the profile and the performance equivalent to those obtained through the casting mold currently in use, can become to be realizable easily.
The technology takes raw jewelry, fresh from the casting mold, and grinds off the excess metal using robotic systems similar to those used in the automotive industry.
A thin layer of the polyurethane dispersion is sprayed onto this surface in a manner similar to the technique used when working with a casting mold and assumes the desired shape.
With a properly seeded investment casting mold in hand, single crystal castings are produced by controlling the solidification of the molten alloy in the mold using a heated coil or some other thermal device.
The Aluminum Association standard casting mold (Fig.
It is known as a "binder" because it binds together the sand that forms the "core" part of the casting mold.
PCPC controls how molten aluminum fills a casting mold to ensure uniform metal flow, and it prevents the entrance of gases (a leading cause of porosity in the metal).