A variable that affects the rate of conductive heat transfer
is the distance that the heat must be conducted.
The new VHE elements are applied in two applications, which are the solid mechanics and conductive heat transfer
Because of this design, conductive heat transfer
can only happen at the connection point.
Conductive heat transfer
in granular systems may be described simply by conduction between the particles in contact and no continuous phase is required.
The sensor size eliminates any conductive heat transfer
issues through the lead wire, which enhances measurement accuracy.
The generation of heat in the polymer itself depends on its thermal properties, viscosity, and the conductive heat transfer
to or from the extruder.
The latter is calculated as the heat transfer load, that is, the thermal load due to convective, radiative, and conductive heat transfer
mechanisms plus the infiltration load.
Steady-state conductive heat transfer
in two dimensions is first simulated to evaluate the borehole thermal resistance for the different configurations.
Using fluids with higher conductive heat transfer
coefficients, which are usually practiced to increase the heat transfer coefficient of microchannels, causes high pressure drops.
it can be seen that the conductive heat transfer
through knitted fabric takes place through unsupported yarns, interlaced region and air pores (only in case of non-convective mode) (Salopek & Skenderi, 2009 a).
bot] Conductive heat transfer
from basin liner to ambient through bottom side, W [Q.
The VIP design further reduces conductive heat transfer
into the LNG by using special purpose bayonet end connections.