Lumber (redirected from Dimension wood)

lumber, term for timber that has been cut into boards for use as a building material. The major steps in producing lumber involve logging (the felling and preparation of timber for shipment to sawmills), sawing the logs into boards, grading the boards according to defects and intended use, drying, and finishing the rough boards into smoother products. Among the leading lumber-producing countries in the world are Russia and the United States, which together produce over 50% of the world's lumber supply. In the United States, Maine early took the lead in production, but as the industry spread the forests of the West acquired increasing importance and Oregon, Washington, and California became leading producers. More recently, the forests of the S United States have taken over a large share of lumber production. Lumbering was one of the first industries in North America—its first exports were ship timbers. Logging was a frontier industry, the work being rough, dangerous, and difficult. Romantic, exaggerated stories and legends of the feats of the lumberjack are a colorful chapter in U.S. folklore. For lumber cuts and preparations, see wood.

Bibliography

See N. C. Brown, Lumber (2d ed. 1958); R. E. Pike, Tall Trees, Tough Men (1967); L. Blanchard, The Lumberjack Frontier (1969).

---

lumber

Collective term for harvested wood, whether cut into logs, heavy timbers, or members used in light-frame construction. Lumber is classified as hardwood or softwood (see wood). The term often refers specifically to the products derived from logs in a sawmill. Conversion of logs to sawed lumber involves debarking, sawing into boards or slabs, resawing into thinner boards of varying sizes, edging, crosscutting to square the ends and remove defects, grading according to strength and appearance, and drying in the open air or in kilns. Drying below the fiber-saturation point results in shrinkage and generally greater strength, stiffness, and density and better prepares the wood for finishing. Preservatives are often applied to protect the wood from deterioration and decay.

---

lumber

Chiefly US and Canadian

a. logs; sawn timber

b. cut timber, esp when sawn and dressed ready for use in joinery, carpentry, etc.

c. (as modifier): the lumber trade

---

lumber [′ləm·bər]

(materials)

Logs that have been sawed and prepared for market.

---

lumber

Timber sawn or split in the form of beams, boards, joists, planks, etc., esp. that which is smaller than heavy timber. Also see board, 1, dimension lumber, matched boards, and yard lumber.

---

Lumber 

materials (beams, boards, scantlings) produced by sawmilling. Depending on the method of sawing, lumber may be quarter-sawn, flat-sawn, or combined sawn. Lumber with edges finished by sawing is called square-edged, while material without finished edges is called rough. That which has been further processed after sawing in order to smooth the surface or to produce specially shaped surfaces is called dressed. Lumber is used for construction and for making packing containers, furniture, and other articles.