We fixed the indoor, dry bulb temperature
at 80 [degrees] F, and fixed the suction, saturation temperature at 50.
78[degrees]C), dry bulb temperature
, (see Figure 1), to -240 ton (844 kW) at 6AM as shown by the top chart of Figure 9.
This process is shown in Figure 3 and by examining the psychrometric chart, it is apparent how through this staged sensible (Point 1 to 2) then latent cooling (Point 2 to 3), a supply air dry bulb temperature
The ASHREE method is applicable to dry bulb temperature
and relative humidity.
8[degrees]C) and indoor dry bulb temperatures
from 55[degrees]F to 75[degrees]F (12.
IEC using air-to-air heat exchangers began to show up in the market place in the mid 70s, initially to utilize the exhaust wet-bulb, as opposed to the exhaust dry bulb temperature
, to increase recovery efficiency.
Based on a dry bulb temperature
of 230[degrees]F and a wet bulb depression of 50[degrees]F, the maximum gas moisture content in the kiln was calculated as 50 percent.
If you have a blotch problem, may I suggest that you measure the wet bulb and dry bulb temperature
Temperature in the chocolate cold stores is maintained between 15 and 17[degrees]C, but should the humidity rise above setpoint then the heaters are brought in to counter the cooling effect, which reduces the humidity to setpoint while at the same time maintaining the dry bulb temperature
, but remaining within the temperature/humidity deadband.
Temperature/humidity combinations are expressed as Apparent Equivalent Temperature (AET) derived from dry bulb temperature
, water vapor pressure and the corrected psychrometric constant.
Accurately controlling the dry bulb temperature
according to the individual mold requirements may prove difficult in an industrial environment.
Yousef (1985) considered the dry bulb temperature
and dew point temperature for the formulation of THI.