English units of measurement

Also found in: Dictionary, Thesaurus, Medical, Legal, Financial.

English units of measurement,

principal system of weights and measuresweights and measures,
units and standards for expressing the amount of some quantity, such as length, capacity, or weight; the science of measurement standards and methods is known as metrology.

Crude systems of weights and measures probably date from prehistoric times.
..... Click the link for more information.
 used in a few nations, the only major industrial one being the United States. It actually consists of two related systems—the U.S. Customary System of units, used in the United States and dependencies, and the British Imperial System. The names of the units and the relationships between them are generally the same in both systems, but the sizes of the units differ, sometimes considerably.

Customary Units of Weights and Measures

Units of Weight

The pound (lb) is the basic unit of weight (which is proportional to mass). Within the English units of measurement there are three different systems of weights. In the avoirdupois system, the most widely used of the three, the pound is divided into 16 ounces (oz) and the ounce into 16 drams. The ton, used to measure large masses, is equal to 2,000 lb (short ton) or 2,240 lb (long ton). In Great Britain the stone, equal to 14 lb, is also used. The troy system (named for Troyes, France, where it is said to have originated) is used only for precious metals. The troy pound is divided into 12 ounces and the troy ounce into 20 pennyweights or 480 grains; the troy pound is thus 5,760 grains. The grain is also a unit in the avoirdupois system, 1 avoirdupois pound being 7,000 grains, so that the troy pound is 5,760/7,000 of an avoirdupois pound. Apothecaries' weights are based on troy weights; in addition to the pound, ounce, and grain, which are equal to the troy units of the same name, other units are the dram (1/8 oz) and the scruple (1/24 oz or 1/3 dram).

Units of Length and Area

The basic unit of length is the yardyard,
abbr. yd, basic unit of length in the customary system of English units of measurement; all other units in the English system, such as the inch, foot, rod, and mile, are derived from it.
..... Click the link for more information.
 (yd); fractions of the yard are the inch (1/36 yd) and the foot (1/3 yd), and commonly used multiples are the rod (5 1-2 yd), the furlong (220 yd), and the mile (1,760 yd). The acre, equal to 4,840 square yards or 160 square rods, is used for measuring land area.

Units of Liquid Measure

For liquid measure, or liquid capacity, the basic unit is the gallon, which is divided into 4 quarts, 8 pints, or 32 gills. The U.S. gallon, or wine gallon, is 231 cubic inches (cu in.); the British imperial gallon is the volume of 10 lb of pure water at 62°F; and is equal to 277.42 cu in. The British units of liquid capacity are thus about 20% larger than the corresponding American units. The U.S. fluid ounce is 1/16 of a U.S. pint; the British unit of the same name is 1/20 of an imperial pint and is thus slightly smaller than the U.S. fluid ounce.

Units of Dry Measure

For dry measure, or dry capacity, the basic unit is the bushel, which is divided into 4 pecks, 32 dry quarts, or 64 dry pints. The U.S. bushel, or Winchester bushel, is 2,150.42 cu in. and is about 3% smaller than the British imperial bushel of 2,219.36 cu in., with a similar difference existing between U.S. and British subdivisions. The barrel is a unit for measuring the capacity of larger quantities and has various legal definitions depending on the quantity being measured, the most common value being 105 dry quarts.

Differences between American and British Systems

Many American units of weights and measures are based on units in use in Great Britain before 1824, when the British Imperial System was established. Since the Mendenhall Order of 1893, the U.S. yard and pound and all other units derived from them have been defined in terms of the metric units of length and mass, the metermeter,
abbr. m, fundamental unit of length in the metric system. The meter was originally defined as 1/10,000,000 of the distance between the equator and either pole; however, the original survey was inaccurate and the meter was later defined simply as the distance between two
..... Click the link for more information.
 and the kilogramkilogram,
abbr. kg, fundamental unit of mass in the metric system, defined as the mass of the International Prototype Kilogram, a platinum-iridium cylinder kept at Sèvres, France, near Paris.
..... Click the link for more information.
; thus, there is no longer any direct relationship between American units and British units of the same name. In 1959 an international agreement was reached among English-speaking nations to use the same metric equivalents for the yard and pound for purposes of science and technology; these values are 1 yd=0.9144 meter (m) and 1 lb=0.45359237 kilogram (kg). In the United States, the older definition of the yard as 3,600/3,937 m is still used for surveying, the corresponding foot (1,200/3,937 m) being known as the survey foot.

The English units of measurement have many drawbacks: the complexity of converting from one unit to another, the differences between American and British units, the use of the same name for different units (e.g., ounce for both weight and liquid capacity, quart and pint for both liquid and dry capacity), and the existence of three different systems of weights (avoirdupois, troy, and apothecaries'). Because of these disadvantages and because of the wide use of the much simpler metric system in most other parts of the world, there have been proposals to do away with the U.S. Customary System and replace it with the metric system.


See L. J. Chisholm, Units of Weights and Measure: International and U.S. Customary (U.S. National Bureau of Standards, 1967).