flat chisel


Also found in: Dictionary.

flat chisel

[¦flat ′chiz·əl]
(design engineering)
A steel chisel used to obtain a flat and finished surface.
Mentioned in ?
References in periodicals archive ?
A skew chisel "Shape 2," is a flat chisel whose cutting edge is at an angle to facilitate reaching into tight areas.
2 Octagonal Chisel, Length 200 Mm, Cutting Edge 25 Mm One No , 3 Octagonal Chisel, Length 250 Mm, Cutting Edge 30 Mm One No B Flat Chisels 1 Flat Chisel, Length 150 Mm, Cutting Edge 20 Mm One No , 2 Flat Chisel, Length 200 Mm, Cutting Edge 25 Mm One No , 3 Flat Chisel, Length 235Mm, Cutting Edge 25 Mm One No.
Limited Tenders are invited for Cold Flat Chisel (Octagonal) Made Out Of Chrome
Tenders are invited for Non Sparking Tools 1Set 24 Items Make-Taparia/Gadore As Per List- 1 Flat Chisel 300X25 Mm 02Nos 2 Pin Punch18x175 02Nos 3 Wrench Double Open End 16X17 02Nos 4 Wrench Double Open End 18X19 02Nos 5 Wrench Double Open End 24 X 27 02Nos 6 Wrench Double Open End 30 X 32 02Nos 7 Spanner Double Ring End 16 X17 02Nos 8 Spanner Double Ring End 18 X 19 02Nos 9 Spanner Double Ring End 24 X 27 02Nos 10 Spanner Double Ring End 30 X 32 02Nos 11 Ball Pein Hammer 450Grms01no 12 Ball Pein Hammer 680Grms 01No 13 Pipe Wrench 30 X250 01No 14 Pipe Wrench 40 X 300 01No
The three basic types of chisels remain the same: a point for roughing out the stone, tooth chisels (also called claw tools) for shaping and modelling the forms and flat chisels for the finished surfaces and details.
1 [inches], 1 1/2 [inches], and 2 [inches] wide wood flat chisels and a right-angle gouge are essential for making clean edges in joints.
Tenders are invited for Set Of Flat Chisels With Quick Coupling Handle: Imported Make, Proprietary J And J, Quotations From Dealers Eligible Only If Accompanied By Authorisation From Oem, One Set Comprises Of One Handle With Quick Coupling Adaptation For Chisel And Set Of 4 Chisels, Chisels Of Sizes From 5Mm To 20Mm On Interchangeable Basis, Chisel Or Osteotome Design On Interchangeable Basis, Exact Proportion Of Various Types Of Plates And Screws To Be Finally Supplied Must Be Verified Form Indenter After Po Is Issued