Geothermal power

(redirected from Geothermal power plant)
Also found in: Dictionary, Acronyms.

Geothermal power

Thermal or electrical power produced from the thermal energy contained in the Earth (geothermal energy). Use of geothermal energy is based thermodynamically on the temperature difference between a mass of subsurface rock and water and a mass of water or air at the Earth's surface. This temperature difference allows production of thermal energy that can be either used directly or converted to mechanical or electrical energy.

Commercial exploration and development of geothermal energy to date have focused on natural geothermal reservoirs—volumes of rock at high temperatures (up to 662°F or 350°C) and with both high porosity (pore space, usually filled with water) and high permeability (ability to transmit fluid). The thermal energy is tapped by drilling wells into the reservoirs. The thermal energy in the rock is transferred by conduction to the fluid, which subsequently flows to the well and then to the Earth's surface.

There are several types of natural geothermal reservoirs. All the reservoirs developed to date for electrical energy are termed hydrothermal convection systems and are characterized by circulation of meteoric (surface) water to depth. The driving force of the convection systems is gravity, effective because of the density difference between cold, downward-moving, recharge water and heated, upward-moving, thermal water. A hydrothermal convection system can be driven either by an underlying young igneous intrusion or by merely deep circulation of water along faults and fractures. Depending on the physical state of the pore fluid, there are two kinds of hydrothermal convection systems: liquid-dominated, in which all the pores and fractures are filled with liquid water that exists at temperatures well above boiling at atmospheric pressure, owing to the pressure of overlying water; and vapor-dominated, in which the larger pores and fractures are filled with steam. Liquid-dominated reservoirs produce either water or a mixture of water and steam, whereas vapor-dominated reservoirs produce only steam, in most cases superheated.

Although geothermal energy is present everywhere beneath the Earth's surface, its use is possible only when certain conditions are met: (1) The energy must be accessible to drilling, usually at depths of less than 2 mi (3 km) but possibly at depths of 4 mi (6–7 km) in particularly favorable environments (such as in the northern Gulf of Mexico Basin of the United States). (2) Pending demonstration of the technology and economics for fracturing and producing energy from rock of low permeability, the reservoir porosity and permeability must be sufficiently high to allow production of large quantities of thermal water. (3) Since a major cost in geothermal development is drilling and since costs per meter increase with increasing depth, the shallower the concentration of geothermal energy the better. (4) Geothermal fluids can be transported economically by pipeline on the Earth's surface only a few tens of kilometers, and thus any generating or direct-use facility must be located at or near the geothermal anomaly.

Equally important worldwide is the direct use of geothermal energy, often at reservoir temperatures less than 212°F (100°C). Geothermal energy is used directly in a number of ways: to heat buildings (individual houses, apartment complexes, and even whole communities); to cool buildings (using lithium bromide absorption units); to heat greenhouses and soil; and to provide hot or warm water for domestic use, for product processing (for example, the production of paper), for the culture of shellfish and fish, for swimming pools, and for therapeutic (healing) purposes.

The use of geothermal energy for electric power generation has become widespread because of several factors. Countries where geothermal resources are prevalent have desired to develop their own resources in contrast to importing fuel for power generation. In countries where many resource alternatives are available for power generation, including geothermal, geothermal has been a preferred resource because it cannot be transported for sale, and the use of geothermal energy enables fossil fuels to be used for higher and better purposes than power generation. Also, geothermal steam has become an attractive power generation alternative because of environmental benefits and because the unit sizes are small (normally less than 100 MW). Moreover, geothermal plants can be built much more rapidly than plants using fossil fuel and nuclear resources, which, for economic purposes, have to be very large in size. Electrical utility systems are also more reliable if their power sources are not concentrated in a small number of large units.

The most common process is the steam flash process, which incorporates steam separators to take the steam from a flashing geothermal well and passes the steam through a turbine that drives an electric generator. A more efficient utilization of the resource can be obtained by using the binary process on resources with a temperature less than 360°F (180°C). This process is normally used when wells are pumped. The pressurized geothermal brine yields its heat energy to a second fluid in heat exchangers and is reinjected into the reservoir. The second fluid (commonly referred to as the power fluid) has a lower boiling temperature than the geothermal brine and therefore becomes a vapor on the exit of the heat exchangers. It is separately pumped as a liquid before going through the heat exchangers. The vaporized, high-pressure gas then passes through a turbine that drives an electric generator. See Electric power generation

References in periodicals archive ?
NCPA owns and operates four geothermal power plants of 55 MWe each at The Geysers, 252 MWe hydroelectric plants, 125 MWe Simple Combustion Turbine plants and 49.
An Indonesian subsidiary of its Shaw Stone & Webster has been awarded an engineering, procurement and construction contract for a new 60 MW geothermal power plant by PT Pertamina.
Merrill Lynch to Finance Development and Provide Tax Equity Capital for Raser's 10 MW Utah Geothermal Power Plant
27 /PRNewswire/ -- Vulcan Power Company today announced it has challenged threats by California Energy to move the initial 3OMW (megawatt) geothermal power plant from the proposed location on Newberry Volcano, Oregon.
NYSE Arca: RZ) today announced that it has begun taking delivery of the UTC Power, a United Technologies Company, geothermal power generating units ordered for the first commercial scale geothermal power plant to be built in the state of New Mexico.
The geothermal plant is planned to have a gross generation capacity of 14 megawatts (MW) when configured under Raser's proprietary geothermal power plant design.
The project is said to be the fourth and largest in a series of geothermal power plants in Kenya s Eastern Rift Valley.
PT Pertamina Geothermal, a geothermal subsidiary of the state-owned oil company Pertamina said it will invest US$ 200 million to increase production capacity and build new geothermal power plant.
Nasdaq-NNM: MGMA) today announced that it plans to build a new 36 MW geothermal power plant at the Salton Sea in Southern California to supply power to Southern California Edison (SCE) under two long-term power purchase contracts with SCE.
Under the Lumut Balai Geothermal Power Plant Project, a geothermal power plant will be constructed in Muara Enim Regency in South Sumatra Province and connected to the Sumatra power grid.
Tax credits and various other tax benefits are available for activities involved in geothermal power plant development and electricity generation.
Sumitomo announced that it won an engineering, procurement and construction (EPC) contract for Pertamina s geothermal power plant project in Lampung.