Heat Equation

(redirected from Heat Diffusion Equation)

heat equation

[′hēt i‚kwā·zhən]
(thermodynamics)
A parabolic second-order differential equation for the temperature of a substance in a region where no heat source exists: ∂ t /∂τ = (kc)(∂2 t /∂ x 2+ ∂2 t /∂ y 2+ ∂ t 2/∂ z 2), where x, y, and z are space coordinates, τ is the time, t (x,y,z, τ) is the temperature, k is the thermal conductivity of the body, ρ is its density, and c is its specific heat; this equation is fundamental to the study of heat flow in bodies. Also known as Fourier heat equation; heat flow equation.

Heat Equation

a parabolic partial differential equation that describes the process of propagation of heat in a continuous medium, such as a gas, liquid, or solid. It is the basic equation in the mathematical theory of thermal conductivity.

The heat equation expresses the heat balance for a small element of volume of the medium; heat gains from sources and heat losses through the surface of the element are taken into account for heat transport by conduction. The equation has the following form for an isotropic nonhomogeneous medium:

Here, ρ is the density of the medium; cv is the specific heat of the medium at constant volume; t is time; x, y, and z are space coordinates; T = T(x, y, z, t) is the temperature, which is calculated by means of the heat equation; λ is the coefficient of thermal conductivity; and F = F(x, y, z, t) is the specified density of the heat sources. The magnitudes of ρ cv, and λ depend on the coordinates and, generally speaking, on the temperature. For an anisotropic medium, the heat equation contains in place of λ the thermal conductivity tensor λik, where i, k = 1,2,3.

In the case of an istropic homogeneous medium, the heat equation assumes the form

where Δ is the Laplace operator, a2 = λ/(ρcv) is the coefficient of thermal diffusivity, and f = F/(ρcv). In a stationary state, where the temperature does not vary with time, the heat equation becomes the Poisson equation or, when there are no heat sources, Laplace’s equation ΔT = 0. The basic problems for the heat equation are the Cauchy problem and the mixed boundary value problem (seeBOUNDARY VALUE PROBLEMS).

The heat equation was first studied by J. Fourier in 1822 and S. Poisson in 1835. Important results in the study of the heat equation were obtained by I. G. Petrovskii, A. N. Tikhonov, and S. L. Sobolev.

REFERENCES

Carslaw, W. S. Teoriia teploprovodnosti. Moscow-Leningrad, 1947.
Vladimirov, V. S. Uravneniia matematicheskoi fiziki. Moscow, 1967.
Tikhonov, A. N., and A. A. Samarskii. Uravneniia matematicheskoi fiziki, 3rd ed. Moscow, 1966.

D. N. ZUBAREV

References in periodicals archive ?
The finite difference method is based on the approximation of the spatial and temporal derivatives of the heat diffusion equation with relations between finite differences of space and time.
Therefore, the time derivative present in the second member of the heat diffusion equation can be replaced with the finite difference approximation using the "central difference" operator:
One example is the Fourier Heat diffusion equation,
A method to estimate the minimum test duration required to estimate the soil thermal conductivity to within 10% of its long-term estimate was also suggested by Beier and Smith (2003), who developed a solution of the one-dimensional form of the heat diffusion equation by using the Laplace transform method.
In the vertical slice approach, the heat diffusion equation is invariant under spatial rotation about the z-axis of the vertical BHE, and therefore, only the z and r dependences in Equation 2 are considered.
The transient temperature field in the quenched probe can be described by the Fourier-Kirchhoff heat diffusion equation (Incropera & Dewitt, 1996)
The mathematical model is based on the heat diffusion equation, which has been used to describe thermal processes and has been well established for many decades.
This lower constraint, which determines where no healing occurs, and where the interface reaches a steady temperature between 135 [degrees] C and 350 [degrees] C, is dictated by the convective losses assumed in the heat diffusion equation.
The latter is needed, at the macroscopic scale, to account for latent heat released, which is combined with the heat diffusion equation and the boundary conditions to predict the thermal field within the material.

Site: Follow: Share:
Open / Close