cogeneration
In power systems, use of steam for both power generation and heating. High-temperature, high-pressure steam from a boiler and superheater first passes through a turbine to produce power. It is exhausted at a temperature and pressure suitable for heating purposes, instead of being expanded in the turbine to the lowest possible pressure and then discharged to the condenser, which would waste the remaining energy in the steam. The steam at the higher pressure can provide large amounts of lower-temperature energy for heating buildings or evaporating brine in a chemical plant. Considerable overall energy savings can be obtained by cogeneration. See also steam engine.
cogeneration [‚kō‚jen·ə′rā·shən]
Cogeneration
The sequential production of electricity and thermal energy in the form of heat or steam, or useful mechanical work, such as shaft power, from the same fuel source. Cogeneration projects are typically represented by two basic types of power cycles, topping or bottoming. The topping cycle has the widest industrial application.
The topping cycle utilizes the primary energy source to generate electrical or mechanical power. Then the rejected heat, in the form of useful thermal energy, is supplied to the process. The cycle consists of a combustion turbine-generator, with the turbine exhaust gases directed into a waste-heat-recovery boiler that converts the exhaust gas heat into steam which drives a steam turbine, extracting steam to the process while driving an electric generator. This cycle is commonly referred to as a combined cycle arrangement. Combustion turbine-generators, steam turbine-generator sets, and reciprocating internal-combustion-engine generators are representative of the major equipment components utilized in a topping cycle. See Generator, Steam turbine, Turbine
A bottoming cycle has the primary energy source applied to a useful heating process. The reject heat from the process is then used to generate electrical power. The typical bottoming cycle directs waste heat from a process to a waste-heat-recovery boiler that converts this thermal energy to steam which is supplied to a steam turbine, extracting steam to the process and also generating electrical power. See Electric power generation
Cogeneration for building and district space heating and cooling purposes consists of producing electricity and sequentially utilizing useful energy in the form of steam, hot water, or direct exhaust gases. The two most common heating, ventilating, and air-conditioning cycles are the vapor compression cycle and the absorption cycle. See Air conditioning, Central heating and cooling
Want to thank TFD for its existence? Tell a friend about us, add a link to this page, add the site to iGoogle, or visit the webmaster's page for free fun content.
| ?Page tools | ||
|---|---|---|
|