hose clamp


Also found in: Medical, Wikipedia.

hose clamp

[′hōz ‚klamp]
(design engineering)
Band or brace to attach the raw end of a hose to a water outlet.
References in periodicals archive ?
Each disc is coupled with a hose clamp for assembly onto existing idlers in the field.
Gather a large plastic garbage can with lid, a tube of watertight sealant, rubber and metal washers, a spigot, hose clamp, landscaping fabric and a drill.
Slice it lengthways, wrap it around the affected area and hold it in place with a hose clamp.
I have found that if the hose clamp projects beyond the shank of the ferrule, it exacerbates the problem by weakening the inner hose lining much as you would when bending a paper clip.
They are also furnished with a stainless steel hose clamp on the outlet to secure the fitting of choice.
1--two and a half inch long 6-32 machine screw * 1--6-32 nut * aluminum foil * transparent tape (scotch tape) * a couple of small rubber bands * water * a teaspoon of vinegar High Voltage Energy Source: * 1--three to four foot length of 3/4" to 2" diameter PVC (plastic) pipe * a couple of pure wool socks or rabbit fur You will also need the following: * 1--seven inch length of a lx6 board * 1--three inch long 1/4" bolt * 1--2 to 2-1/2" diameter hose clamp * 1--10 inch length of insulated copper wire
Then remove the lower radiator hose clamp and hose from the engine to drain the rest of the coolant.
A sharp seal point on the barb seals securely with flexible tubing and has been tested to hold pressure up to 150 psi without the use of a hose clamp.
For example, a customer can import the design of a hose clamp done at Mikalor into its engine design, done in its own CAD program.
A brake hose clamp could work loose and cause a fluid leak on all cars built between January and June 2001.
0098"-thick vinyl, it has large-bore inlet tubing, an air vent and drain tube with a hose clamp.
The fitting's sharp barb has been known to hold up to 125 psi without use of a hose clamp.