hot glue

(redirected from Hot melt glue)

hot glue

A glue which must be heated before use. Also see hot-setting adhesive.
References in periodicals archive ?
System applies a minimum amount of light tach hot melt glue, allowing the clean release of the last label off the core.
Nordson hot melt glue system and controls from Rockwell Automation.
Fuller Launches High-Performance Hot Melt Adhesive II-24 Henkel Introduces New Line of Coating and Laminate Products II-24 Henkel to Unveil Water and Heat Resistant Hot Melt Adhesives II-24 Henkel Launches Improved Reactive Hot Melt Adhesive II-25 Henkel Launches Hot Melt Adhesives for Packaging Applications II-25 KMS Unveils Mattress-Specialty Hot Melt Adhesives II-25 NJM Launches Enhanced Version of Hot Melt Glue Applicators II-25 5.
Features include a hot melt glue pot equipped with automatic temperature lowering, a heated infeed fence, and mechanical digital counters.
Ian commented, "In this instance a hot melt glue application was recommended as it secures the base of the box without producing an overlap which can often be the case with tape applications--allowing Nairn's to meet supermarket shelf ready expectations.
The applicator uses hot melt glue, which reliably holds heavy outserts.
Other available machine options include inline folding plows, inline slitting to produce up to six finished products per cycle (90 products per minute), hot melt glue closure, Elsner's patented tail finder option to assist the end user in locating the start of the roll and custom integration with downstream packaging equipment.
They load the collated product atop a pre-dispended corrugated tray blank, allot hot melt glue, fold the tray flaps and compress and square the product/tray combination for discharge to an integrated Polypack shrink wrap machine.
It is easy to fix inserts installed in aluminum and aluminum/carbon arrows by simply heating a field point installed in the insert until the hot melt glue holding the insert melts.
Rub a stick of hot melt glue, such as Bohning's Ferr-L-Tite, onto the hot insert to deposit a small amount of glue onto the insert.
Standard features include Allen Bradley components, gravity roller discharge and a pressurized hot melt glue unit.
Once cured, the mold halves are mounted together and prepared for the molding operation by putting a bead of hot melt glue around the joint to keep the halves from separating or shifting.