MIMO
(Multiple Input/Multiple Output) Pronounced "my-mo," it is the use of multiple transmitters and receivers (multiple antennas) on wireless devices for improved performance. When two transmitters and two or more receivers are used, two simultaneous data streams can be sent, which double the data rate. Multiple receivers alone allow greater distances between devices. The IEEE 802.11n wireless standard, expected in 2009, uses MIMO to increase maximum speed to 100 Mbps and beyond, double the 802.11a and 11g wireless standards.
MIMO, MISO and SIMO
Following are the advantages of using multiple antennas rather than one. The terminology is "M" for multiple, "S" for single, "I" for input and "O" for output; however, the inputs and outputs relate to the air, not the device. This is a peculiar notation; nevertheless, multiple inputs (MI) means multiple transmitters are sending multiple data streams "into" the air. Multiple outputs (MO) means multiple receivers are receiving multiple data streams "out of" the air. See 802.11n, antenna diversity and HSPA.
ARCHITECTURE AND ADVANTAGES OF
MULTIPLE ANTENNA TECHNOLOGIES
Compared to
Single Antenna
Technologies
Transmit Receive Data
Type Antennas Antennas Rate Distance
MIMO Multiple Multiple Greater Greater range
MISO Multiple Single Same Same range but
More Reliable
SIMO Single Multiple Same Greater range
 |
| MIMO Wireless Router |
|---|
| This "Pre-N" wireless router from Belkin uses two transmitters and three receivers to provide 108 Mbps between its access point and Belkin Pre-N cards in laptops. Introduced in 2004, this was the first "Preliminary-802.11n" system on the market (see 802.11n). (Image courtesy of Belkin Corporation, www.belkin.com) |
