Kirchhoff's Laws

Kirchhoff's laws [for Gustav R. Kirchhoff], pair of laws stating general restrictions on the current and voltage in an electric circuit. The first of these states that at any given instant the sum of the voltages around any closed path, or loop, in the network is zero. The second states that at any junction of paths, or node, in a network the sum of the currents arriving at any instant is equal to the sum of the currents flowing away.

---

Kirchhoff's circuit rules

 or Kirchhoff's laws

Two statements, developed by Gustav Kirchhoff, about complex circuits that embody the laws of conservation (see conservation law) of electric charge and energy. They are used to determine the value of the electric current in each branch of the circuit. The first law states that the sum of the currents into a junction in the circuit equals the sum of the currents out of the junction. The second law states that around each loop in an electric circuit, the sum of the electromotive force is equal to the sum of all the potential drops (changes in voltage) across components in the loop. Using these rules, algebraic equations can be formulated to determine the value of currents in different loops in a circuit.

---

Kirchhoff’s Laws 

(Kirchhoff’s circuit rules), laws establishing the relationships of currents and voltages in branching electric networks carrying direct or quasi-stationary currents. The laws were formulated by G. R. Kirchhoff in 1847.

Kirchhoff’s first law follows from the law of conservation of electric charge. It states that the algebraic sum of currents I_k converging at any junction point (node) is zero; that is,

where l is the number of currents converging at a given node. In this case, currents flowing toward the node are assumed to be positive, and the currents away from the node negative (Figure l,a). Kirchhoff’s second law states that in any closed path arbitrarily isolated from a complex network of conductors (Figure l,b), the algebraic sum of all voltage drops I_kR_k in the individual sections of the path (branch) is equal to the sum of electromotive forces (emf’s) Ƹ_k in this path; that is,

where m is the number of branches in the closed path (in Figure l, m = 3) and I_k and R_k are the current and resistance of the branch numbered k. Here, a positive direction of currents and emf’s should be selected; for example, consider them to be positive if the direction of current coincides with tracing of the path in a clockwise direction and the emf increases the potential in the same direction of tracing and consider them negative in the opposite direction. Kirchhoff’s second law is obtained by applying Ohm’s law to the individual branches of a closed path.

Figure 1

Kirchhoff’s laws make it possible to quantitatively analyze complex electric networks. For instance, strength and direction of current can be determined for any part of a branched system of conductors if the resistances and the emf’s are known for all of its branches. For a system of n conductors forming r nodes, n equations are set up. The r – 1 equation for nodes is based on Kirchhoff’s first law (the equation for the last node is not independent but is determined by the foregoing equations), and the n – (r – 1) equations for independent closed circuits are based on Kirchhoff’s second law. Each of the n conductors has to be entered in these latter equations at least once. Since in setting up equations it is necessary to take into account the directions of currents in conductors, which are not known in advance (and must be found by solving the system of equations), these directions are at first given arbitrarily. If during the solution for any current a negative sign is obtained, then this indicates that the direction of the current is opposite to the direction first assumed.

REFERENCES

Frish, S. E., and Timoreva, A. V. Kurs obshchei fiziki, 7th ed., vol. 2. Moscow, 1958. Subsection 169.
Kalashnikov, S. G. Elektrichestvo. Moscow, 1956. (Obshchii kurs fiziki, vol. 2) Subsection 79.