Mercury-Vapor Lamp

(redirected from Mercury vapor lamp)
Also found in: Dictionary, Thesaurus, Medical, Wikipedia.
Related to Mercury vapor lamp: Sodium vapor lamp

mercury-vapor lamp

[′mər·kyə·rē ¦vā·pər ‚lamp]
A lamp in which light is produced by an electric arc between two electrodes in an ionized mercury-vapor atmosphere; it gives off a bluish-green light rich in ultraviolet radiation. Also known as mercury lamp.

Mercury-Vapor Lamp


a gas-discharge light source in which an electric discharge in mercury vapor is accompanied by optical radiation in the ultraviolet, visible, and near-infrared regions of the spectrum. Mercury-vapor lamps are subdivided into low-pressure, high-pressure, and superhigh-pressure lamps according to the operating pressure. This pressure in turn depends on the temperature of the coldest section of the arc tube and the quantity of mercury introduced into the tube.

Low-pressure lamps, wherein the pressure is approximately 0.7 newton per square meter (N/m2), are efficient sources of resonance mercury radiation at wavelengths of 185 to 254 nanometers (nm). The most widely used lamps in this group are fluorescent lamps and bactericidal lamps.

High-pressure mercury-vapor lamps (104–106 N/m2) are efficient light sources that radiate predominantly in the ultraviolet and visible regions of the optical range. The spectra of these sources have a lined appearance with spectral lines in the wavelength range of 248 to 1,014 nm. The arc tubes of high-pressure lamps, which have a diameter of 8–60 mm and a length of 30–1,500 mm, are made of refractory, transparent quartz glass and are filled with an inert gas and a certain quantity of mercury. When the lamp is in operation, the mercury within the tube evaporates completely and creates the required pressure. The discharge is a bright arc that strikes across the electrodes along the axis of the tube. At pressures exceeding 105 N/m2, there appears a continuous background of radiation, whose intensity increases with the current density and pressure. The power ratings of high-pressure mercury-vapor lamps range from 50 watts (W) to 50 kilowatts (kW); their luminous efficiency is 40–60 lumens per watt (lu/W). High-pressure mercury lamps with outer bulbs coated on the inside with a phosphor are used for lighting. Lamps without a phosphor coating are utilized in medicine (phototherapy) and photochemistry and in photocopying apparatus.

Superhigh-pressure mercury-vapor lamps (above 106 N/m2) are sources of very bright radiation in the ultraviolet and visible regions. Their spectra have a lined appearance with the most intense lines corresponding to wavelengths of 312 to 579 nm. In both the ultraviolet and visible regions, a continuous radiation background is superimposed on the lined spectrum, and the intensity of the background increases with the current density and pressure. Superhigh-pressure lamps can have natural cooling or water cooling, according to which the arc tube will be, respectively, spherical or capillary. The power ratings of superhigh-pressure mercury-vapor lamps range from 100 W to 10 kW, and their luminous efficiency is 30–70 lu/W. These lamps are used in various optical apparatus.

Among the high-pressure and superhigh-pressure mercury-vapor lamps, the metallohalogen lamps are of particular interest. Here, the halides of certain metals are added to the arc tubes in order to increase significantly the efficiency and to vary within wide limits the spectral composition of the radiation.

Special starting and regulating devices must be used in connecting all mercury lamps to circuits.


Rokhlin, G. N. Gazorazriadnye istochniki sveta. Moscow-Leningrad, 1966.
Rtutnye lampy vysokogo davleniia. Moscow, 1971. (Translated from English.)


mercury-vapor lamp

An electric-discharge lamp consisting of an electric arc in mercury vapor in a sealed tube, which in turn may be enclosed in an outer glass envelope; the light produced appears to be blue-white, but contains only violet, blue, green, and yellow components. The lamp is said to be “low pressure” if the partial pressure of the vapor is below 0.001 atmosphere, and “high pressure” if about an atmosphere.
References in periodicals archive ?
While mercury vapor lamps remain in the market, their relatively low efficacy in the range of 50-60 lumen per watt (lm/W), and poor color quality have been superseded by high-pressure sodium (HPS) lamps with double the efficacy, and quartz metal halide (QMH) lamps that also have higher efficacy and better color.
If we have a short wavelength photoinitiator in a varnish, it will work well with a mercury vapor lamp.
Before the curing issue is discussed, bear in mind that a medium pressure mercury vapor lamp generates a large amount of heat, perhaps in the neighborhood of 50 percent of its spectral output (see lamp diagram).
Self-ballasted mercury vapor lamps are a later example.
Emerging lighting technologies - product Light emitting diodes (LED), Fluorescent lighting, High intensity discharge, Neon lamps, Distance lighting, Wireless Lighting, Sulfur Plasma, Tungsten photonic lattice - Emerging lighting technologies - application General lighting, Industrial lighting, Aerospace and defense, Agricultural, Medical, Automotive, Street Lighting, Movies/Theatres, Decoration, Advertisement, Display backlighting, Signs and Traffic signaling, and others - Emerging lighting technologies - technology Electronic ballast based, Pulse start, Substrate materials, Laser lift-off, Temporary bonding, Binning, Surface texturing, Phosphor composition and deposition, High Pressure Mercury Vapor Lamps, Low Pressure Mercury Vapor Lamps, Tungsten photonic lattice, and others
Collecting involves illuminating a sheet with mercury vapor lamps.
The integrally ballasted light can be used with high-pressure sodium lamps, metal halide lamps, or mercury vapor lamps.
Fifty-three percent of the patients treated by ophthalmologists had used bed/booth devices, 17 percent had used reflective bulbs, 11 percent used mercury vapor lamps, and 20 percent used unspecified UV devices.
Thus, a standard camera rated for incandescent light will have considerably less sensitivity when observing a scene lighted by mercury vapor lamps.
UV LED lamps are alternatives to the mercury vapor lamps that have been around for more than 130 years.