Primer coat


Also found in: Dictionary, Thesaurus, Wikipedia.

Primer coat

Ground coat of paint applied to timber and other materials as a preservative and as a filler for the pores, which serves as a base for future coats of paint.
References in periodicals archive ?
Exterior surfaces of the water tank and the interior "dry" surfaces (the mechanical room which houses all the electrical equipment, pumps, feed lines, and ladders) received a single primer coat of Corothane[R] I Mio-Zinc Primer at five to six mils wet film thickness.
Three-coat systems incorporate a primer coat, an intermediate coat, and a finish coat.
Dexter Corp has developed methacrylates adhesives that can bond plastics to metals without the use of primer Hysol H4500 has an internal proprietary primer that eliminates need for a primer coat on stainless steel.
The top graph shows the rate of drying for a 20 [micro]m primer coat, while the bottom is for a 100 [micro]m main coat or retouch.
The innovation of the IP II consists in eliminating the second paint layer, the primer coat and its baking phase.
Each bumper is then transported into the drying room where a turnkey ACI air drying system is used to blow residue water off before the bumpers go through the paint process - a primer coat, a colour coat and a final clear gloss coat.
Eliminating the door jamb cut-in on premium finishes by using a metallic primer coat saves $3.
section of infrared heaters was placed after the first spray booth for force-drying the water-based primer coat.
The primer coat contains a carefully chosen and blended combination of resins and unusually hard materials, permitting a far higher percentage of special reinforcing elements than other reinforced coatings contain.
Prior to converting to the conductive GTX material, the mirror housing required a conductive primer coat to be applied to all surfaces including body mount areas to ensure grounding, as well as a second, manually applied "bridge" coat of color, according to UTA technical manager Ron Hendricks.
The Galvalume steel sheet shall be finished with 20 microns of silicon modified polyester (SMP) colour coating (approved colour) overan epoxy primer coat of 5 micron.
The product was developed for use on metal pans and assemblies as either a protective primer coat to be later top-coated or as a standalone coating.