Single-Sideband Modulation

(redirected from Single sideband modulation)

single-sideband modulation

[′siŋ·gəl ¦sīd‚band ‚mäj·ə′lā·shən]
(communications)
Modulation resulting from elimination of all components of one sideband from an amplitude-modulated wave.

Modulation, Single-Sideband

 

a method of controlling electrical waves by transmitting an information signal on only one sideband of frequencies. This process is used mainly in single-sideband communication, radio-telemetry, radio control, and television.

With amplitude modulation, information is ordinarily contained in each of two sidebands:

ωc – (Ωlu) and ωc + (Ωlu)

With single-sideband modulation, however, the carrier frequency (carrier wave) and the frequencies of one sideband are usually suppressed (see Figure 1). As a result, the frequency band filled by the signal is cut to approximately half its original width, and twice the number of communication channels can be allocated to the same frequency range.

Single-sideband modulation can be achieved by suppressing the carrier wave with a balanced modulator and then isolating either the upper or the lower sideband with a band-pass filter. A second method is the phase-compensation method, in which

Figure 1. Spectral composition of electrical waves transmitted by a single-sideband modulation: (U) wave voltage, (Ωi) lower-sideband frequency, (Ωu) upper-sideband frequency, (ωc) carrier frequency. The suppressed waves are indicated by broken lines.

corresponding waves of the modulated (high-frequency) spectrum are balanced out in a nonlinear conversion of the spectrum. The phase-filter method, a combination of these two principles, is also used.

REFERENCE

Verzunov, M. V. Odnopolosnaia moduliatsiia ν radiosviazi. Moscow, 1972.

V. M. TIMOFEEV

Full browser ?