Span (redirected from Spane)

span

1. Psychol the amount of material that can be processed in a single mental act

2. short for wingspan

3. a unit of length based on the width of an expanded hand, usually taken as nine inches

---

span [span]

(aerospace engineering)

The dimension of a craft measured between lateral extremities; the measure of this dimension.

Specifically, the dimension of an airfoil from tip to tip measured in a straight line.

(engineering)

A structural dimension measured between certain extremities.

(mathematics)

For a setA, the intersection of all sets that containAand have some specified property. Also known as hull.

For a set of vectors, the set of all possible linear combinations of those vectors. Also known as linear span.

(statistics)

The difference between the highest value and the lowest value in a range of values.

---

bearing distance, span

The length of a beam between its bearing supports.

---

span

1. The interval between two terminals of a construction.

2. The distance apart of any two consecutive supports, esp. as applied to the opening of an arch.

3. A structural member (or part of a member) between two supports.

---

Span 

of a bridge, the part of a bridge that extends between the bridge piers and carries various loads, such as transportation vehicles, pedestrians, and winds, which it transfers to the piers.

A span consists of such bearing components as longitudinal beams or trusses, crossbeams or diaphragms, and slabs for the roadway. In arch bridges the main bearing components are the arches, which support the structure above them. Loads carried by spans are transferred to piers through bearing parts. The roadway slab of a span supports a roadbed and pedestrian sidewalks. The surface of the slab is paved with a layer of topping of asphalt or cement concrete and waterproofing. The material used for a span may be a metal, such as an aluminum alloy or steel, plain or reinforced concrete, native stone, or wood.

The span is the most important part of a bridge. The structural design of a bridge and its static diagram depend on the static diagram of the span. The span may be of the girder, frame, arch, suspension, guy, or combination type. The general architectural composition of a bridge is essentially dependent on the type of span. Ordinarily a span is rectilinear as viewed from the top, although the spans of modern bridges, viaducts, and overpasses over the junctions of transportation lines may have more complicated shapes and be spiraled, ringed, or branched.

The static diagram and the structural material used determine the way in which a span is constructed. Spans are usually built from prefabricated units manufactured in specialized plants or yards.

---

Span 

in buildings and structures, the distance between the neighboring supports of horizontal structural elements. There are spans, for example, between the columns that support a roof truss and between the piers that support a bridge span. Standardized span dimensions that conform to the Unified Modules System are currently used in construction in the USSR.