Froude number (redirected from Speed length ratio)

Froude number

The dimensionless quantity U(gL)^-1/2, where U is a characteristic velocity of flow, g is the acceleration of gravity, and L is a characteristic length. The Froude number can be interpreted as the ratio of the inertial to gravity forces in the flow. This ratio may also be interpreted physically as the ratio between the mean flow velocity and the speed of an elementary gravity (surface or disturbance) wave traveling over the water surface.

When the Froude number is equal to one, the speed of the surface wave and that of the flow is the same. The flow is in the critical state. When the Froude number is less than one, the flow velocity is smaller than the speed of a disturbance wave traveling on the surface. Flow is considered to be subcritical (tranquil flow). Gravitational forces are dominant. The surface wave will propagate upstream and, therefore, flow profiles are calculated in the upstream direction. When the Froude number is greater than one, the flow is supercritical (rapid flow) and inertial forces are dominant. The surface wave will not propagate upstream, and flow profiles are calculated in the downstream direction.

The Froude number is useful in calculations of hydraulic jump, design of hydraulic structures, and ship design, where forces due to gravity and inertial forces are governing. In these cases, geometric similitude and the same value of the Froude number in model and prototype produce a good approximation to dynamic similitude. See Dimensional analysis, Dimensionless groups