cutting speed

(redirected from Spindle speed)

cutting speed

[′kəd·iŋ ‚spēd]
(mechanical engineering)
The speed of relative motion between the tool and workpiece in the main direction of cutting. Also known as feed rate; peripheral speed.
References in periodicals archive ?
The crown is operated by the spindle speed and has been designed for machines with autodoffer.
Tenders are invited for Grinding Wheel Different Sizes- 1 G/Wheel Size- 100 Mm Thickness- 6 Mm Hole- 16 Mm Grit A-24Bf Grade- 2608600668 Spindle Speed 15,200 Rpm Qty 2500 Nos.
Objective of this research paper is to investigate optimum spindle speed w.
Therefore, in this study, drilling of coconut meat husk reinforced polyester composites by using carbide twist drill was investigated by evaluating delamination at various spindle speed and feed rate.
After determining the maximum feed, lower the spindle speed until the edge finish once again deteriorates.
Spindle speed is one of the important factors which affect the yarn properties, i.
5D material processing and has a spindle speed of 60,000 rpm.
The 300GB model has a spindle speed of up to 10,000 rpm and an internal data transfer rate of 132MB/s.
The software ensures that the correct cutting speed is used for each tool by controlling the motorized spindle speed.
Standard features include belt limit switches, four second emergency stop switches, motorized thickness adjustment, thickness adjustment with direct numerical readout, air tensioning of the abrasive belt, Posi-Trak abrasive belt tracking, disc brakes, adjustable spindle speed of 50-200 rpm (reversible), Flux Vector feed speed (variable), contact roll on slide for easy removal, heavy fabricated steel main frame, centralized control panel, easy access service ports, quick release outboard support, load meter on main motor, enclosed sanding head for safety, integral dust collection system, feed speed indicator, parts counter and PLC controlled input.
Other performance features of the drive are, high RPM, increased data rate, advanced cache management software, larger cache size and most notable -- 5400 spindle speed in a drive with 9.