T-handle

T-handle

T-handleclick for a larger image
The handle in the cockpit pulled at the first indication of fire. A number of actions take place simultaneously upon pulling this handle: the generators disconnect from the electrical system, the fuel and hydraulic supplies to the engine shut off, the bleed valve closes, and the fire extinguishers operate. Also called a fire pull handle.
References in periodicals archive ?
MedTorque's TRI-GEAR(TM) ratchets are available in axial/in-line, t-handle and palm styles and can be customized with color, logos and artwork.
Side says the T-handle can make PET competitive with HOPE handleware because of higher outputs (up to 4400 bph), lower resin cost, and around 25% lower density.
The 1/4-inch Elexagon hole allows the Combat Optic Tool Optimized to be used as a T-Handle wrench for Torx, Hex and screwdriver bits.
Product is available with a single T-handle or nut, or backing flanges that tightens the clamp around the male and female flanges.
The reel operator tried the manual cutter T-handle and, of course, nothing happened.
The unit features a removable T-handle that can be used with a standard 3/8- or 1/2-inch drive ratchet.
Long handle, D-handle, T-handle (widely used by European gardeners), or spades each have a place in the tool crib.
During K 2013, the machine will demonstrate the insert moulding of hexagonal pencils with a T-handle in a two-cavity mould.
Each of the four walls have 2-inch square aluminum tubing sides that slide over the pipe supports at the corners, held in place by T-handle setscrews.
The Locking Plate design is used when the valve is to be operated by a T-handle and space is limited.
After checking the oil level, you have to turn the T-handle on the dipstick to lock it in place.