The following article is from The Great Soviet Encyclopedia (1979). It might be outdated or ideologically biased.

Generalized Forces

quantities that play the role of ordinary forces when the configuration of a mechanical system is defined by generalized coordinates in an investigation of the equilibrium or motion of the system. The number of generalized forces is equal to the number s of degrees of freedom of the system; here, each generalized coordinate q_i has a corresponding generalized force Q_i. The value of Q₁ corresponding to the coordinate q₁ can be found by computing the virtual work δA₁ performed by all the forces for a virtual displacement of the system in which only the coordinate q₁ is changed, receiving an increment δq₁. Then δA₁ = Q₁ δ q₁ that is, the coefficient for δq₁ in the expression for δA₁ will be the generalized force Q₁. The generalized forces Q₂, Q₃, …, Q_s are calculated in a similar manner.

For example, suppose we have a winch (see Figure 1) that is lifting a load P on a cable, which is a system having one degree of freedom. If the generalized coordinate q₁ is taken to be the angle of rotation ø of the shaft of the winch and if a torque M_f and a frictional moment M_f are applied to the shaft, then neglecting the weight of the cable we obtain δA₁ = (M_t – M_f – Pr)δø, where r is the radius of the shaft. Consequently, for this system, the generalized force corresponding to the coordinate ø will be Q₁ = M_t – M_f – Pr.

The dimensions of a generalized force depend on the dimensions of the generalized coordinate. For example, if the q_i are lengths, then the Q_i will have dimensions of an ordinary force; if the q_i are angles, then the Q_i will have dimensions of a moment of a force. In an investigation of the motion of a mechanical system, generalized forces appear instead of ordinary forces in the Lagrange equations of mechanics; when the system is in equilibrium, all the generalized forces are equal to zero. As an example, for the winch discussed above, when the load is being lifted uniformly, we must have Q₁ = O; that is, M_t = M_f + Pr.

S. M. TARG

Mentioned in

References in periodicals archive

To determine the kinetic and potential energy, energy of dissipation, and generalized forces, kinematics of the mechanical system must first be studied - positions of points (mass centers) and speed - angular of the bodies and linear of the points [14].

Forced Vibrations of the Hopper of Fertilizer Applying Machine

And the deflection is calculated by the generalized forces coupling with the static equilibrium equation.

Static Aeroelastic Modeling and Rapid Analysis of Wings in Transonic Flow

Generalized Forces. This section obtains the contributions to generalized forces of all nonconservative forces and torques that actuate on the tilt-rotor UAV with suspended load.

Suspended Load Path Tracking Control Strategy Using a Tilt-Rotor UAV

Substituting (66) into (63) yields the generalized forces, and substituting the results into (62) gives

Forced Vibration of a Timoshenko Beam Subjected to Stationary and Moving Loads Using the Modal Analysis Method

The numerical manipulations of kinematic stabilization, mapping the generalized forces into Cartesian respective, and implementation of velocity-based constrains into quadratic terms are carried out, and the corresponding subroutines are constructed.

Computational Design Scheme for Wind Turbine Drive-Train Based on Lagrange Multipliers

where A([phi]) is the joint space mass inertia matrix, [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]- the vector of centrifugal and Coriolis forces, G([phi])--the vector of potential forces, [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] --the vector of dissipative forces obtained by differentiating Rayleigh's dissipative function, J([phi])--the matrix of partial derivatives standing before the Lagrange multipliers, [??]--the vector of Lagrange multipliers, [??]--the vector of generalized forces.

Locomotion control method for patients verticalization with regard to their safety and comfort

The generalized forces associated with the user, [f.sub.u], are typically imparted at the mechanical interface between the user and prosthesis, and/or at the interface between the foot and ground.

Impedance & admittance-based coordination control strategies for robotic lower limb prostheses

where L is the Lagrangian function, [V.sub.E] is the elastic potential energy, D is the dissipative energy, [??] is the vector of generalized forces, [C.sup.T.sub.q] is the constraint Jacobian matrix and [??] is the vector of Lagrange multipliers.

Identificacion de parametros dinamicos de la suspension de un vehiculo

where [[M.sup.(e)]], [[C.sup.(e)]], [[K.sup.(e)]]--the matrices of masses, damping of the mechanical energy and stiffness of the finite element; [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]--vectors of generalized accelerations, speeds and displacements of the finite element; {[F.sup.(e)]}--the vector of generalized forces acting on the finite element.

A study of the deflections of metal road guardrail post/Metalinio automobiliu keliu apsauginio atitvaro statramscio ilinkiu tyrimas/Metala aizturietaisu stabu izliecu petijums/Metallist porkepiirdepostide deformatsiooniuuring

For this study, generalized coordinates predominantly represent the articulation of the dancers' joints, and the generalized forces are predominantly the torques at the corresponding joints.

Calculation of muscle loading and joint contact forces during the rock step in Irish dance