Encyclopedia

Submerged Arc Welding

Also found in: Dictionary, Acronyms, Wikipedia.

submerged arc welding

An arc-welding process resulting from heat from an arc drawn between a bare metal electrode and the work; the arc is shielded by a blanket of granular, fusible metal on the work; pressure is not used.
McGraw-Hill Dictionary of Architecture and Construction. Copyright © 2003 by McGraw-Hill Companies, Inc.
The following article is from The Great Soviet Encyclopedia (1979). It might be outdated or ideologically biased.

Welding, Submerged Arc

 

a type of arc welding in which a flux—a special welding material—is used to protect the weld pool from the effects of the surrounding air and to improve the conditions for formation of the weld.

Submerged arc welding promotes stable operating conditions, makes it possible to increase the welding current to 1,000–2,000 amperes and obtain a greater depth of penetration, and ensures that the weld is of high quality throughout its length.

The Great Soviet Encyclopedia, 3rd Edition (1970-1979). © 2010 The Gale Group, Inc. All rights reserved.
Mentioned in
References in periodicals archive
Table 1 Hardness dependence of the layers obtained by submerged arc welding of metal powder spread over [C.sub.T]3 steel surface and melted by [C.sub.B] 08 wire arc on tempering temperature Composition of powder mixture, mass, % Specimen C Cr W Mo Fe-60%V Co P6M5K5 P6M5 Nr.
Wear resistant layers obtained by using materials powder for overlay welding structural steel/Dilimui atsparus sluoksniai gauti konstrukcinio plieno apvirinimui naudojant medziagu miltelius
Mathematical modeling of melting rates for submerged arc welding. Welding J., 1987, 65, 32s-39s.
Development of agglomerated acidic flux for submerged arc welding/Aglomereeritud happelise rabusti valjatootamine kaarkeevituse jaoks
Submerged Arc Welding Characteristics of the CaO-TiO2-SiO2 System, Welding Journal, Vol.
Optimizing stoichiometric welding fluxes using nested random model
The effect of titanium on the APJ 5L - X70 steel subjected to submerged arc welding weld microstructure is investigated in [8].
Automatic arc welding and overlaying welding of steel using waste materials powder/Lankinis automatinis plieno suvirinimas ir apvirinimas naudojant antriniu medziagu miltelius
The Autotrac/WT In other Servo-Robot developments, the company has introduced a compact and intelligent technology for non-contact seam tracking and adaptive submerged arc welding (SAW) of wind turbine tower tubes.
Quanta provides vision for welding
In the case of submerged arc welding, current practice involves the introduction of ultrasonics into the liquid metal bath by means of an electrode wire which is at resonance (Susan et al.
Residual stresses measurements at ultrasonic submerged arc welded joints
The OK Autrod 13.20SC is a copper-coated low alloy wire for submerged arc welding. The EB3 wire is designed to weld creep-resistant steel of the 2.5% Cr--1% Mo type.
Copper-coated low alloy wire
A new, versatile submerged arc welding (SAW) system includes the VL-M4 controller, Right Angle Drive (RAD) wire feed assemblies, Flux Hopper and OBT torches.
Sub--arc welding
Request TOC of this Report- https://www.factmr.com/connectus/sample?flag=T&rep_id=2201 SAW pipes are submerged arc welded pipes, commonly referred to as large-diameter weld pipes, manufactured by the submerged arc welding process.
SAW Pipes Market Projections Highlighting Primary Trends until
Six tenders requesting local & international offers to supply (a) three stamping machines, (b) twelve special purpose welding machines providing for a complete system for full automatic submerged arc welding to fix the base & the two halves of the gas cylinder, (c) two automatic outside (external) polishing machines with circular table & circular post, (d) two automatic inside (internal) grinding (emery) machines with indexing table & inside grinding for the cover, (e) one knuckle type 600 tons joint press for forming & (f) an automatic bottom turning machine with manual load/ unload for the turning of the surface & the side wall of brazed aluminum discs for stainless steel pots.
Request of local & international offers to supply (a) three stamping machines, (b) twelve special purpose welding machines providing for a complete system for full automatic submerged arc welding to fix the base & the two halves of the gas cylinder, (c) t
Copyright © 2003-2025 Farlex, Inc Disclaimer
All content on this website, including dictionary, thesaurus, literature, geography, and other reference data is for informational purposes only. This information should not be considered complete, up to date, and is not intended to be used in place of a visit, consultation, or advice of a legal, medical, or any other professional.