The remaining 12 chemicals (benzotriazole, sodium gluconate, iron [III] phosphate dihydrate, trisodium phosphate dodecahydrate,
triethanolamine, zinc chloride, neutral calcium alkylaryl sulfonate, neodecanoic acid, chloroparaffin, ferric chloride, hydroxyethyl cellulose, and sodium palmitate) had TAN < 1.0 mg KOH/g at 0.1 weight-percent initial concentration and TAN > 1.0 mg KOH/g at 1.0 weight-percent initial concentration.
Copper chloride (Cu[Cl.sub.2] anhydrous 98%), indium chloride (In[Cl.sub.3] anhydrous 98%), gallium chloride (Ga[Cl.sub.3] anhydrous 99%), and selenous acid ([H.sub.2]Se[O.sub.3] anhydrous 98%) were used as precursors and anhydrous ethylenediamine,
triethanolamine, oleylamine, polyetheramine, and oleic acid were used as organic solvents.
Babasafari, "Effectiveness of
triethanolamine on giindabiliiy and properties of portland cement in laboratory ball and vibrating disk Mills," Ceramics-Silikaty, vol.
Based on the studies defined technology for production of the gel composition, which is as follows: By weighing the required amounts of API, DMSO, PG, Carbopol Ultrez 20,
triethanolamine, and purified water.
The change in lubricant color indicative of lubricant decomposition was not observed in the controls and in six chemicals, including Boric Acid, Potassium Fluoride, Potassium Hydrogen Fluoride, Polyoxyethylene Nonylphenyl Ether, Potassium Hexafluoroaluminate and
Triethanolamine Borate.
Jasmine synthetic, chloroacetamide, isopropyl myristate, vanillin, bronopol, sorbic acid, 2-(2-hydroxy-5-methyl-phenyl) benzotriazole, germall 115, hexamine, quaternium 15, geranium oil, butylated hydroxyanisole, and
triethanolamine, the common additives to cosmetics/skin care products, appear to be uncommon sensitizers.
Then the amount of LOR and
triethanolamine was dissolved in the specified quantity solution of methylparaben.
Triethanolamine (TEOHA, Sigma) and 2-hydroxyethyl methacrylate (HEMA, Aldrich) were distilled under reduced pressure before use.
In this study, we have controlled the sonication process and the growth of nuclei by employing good absorption of the
triethanolamine (TEA) onto the surface of the particles.
TEHRAN (FNA)- Iranian materials engineering experts studied the mechanism to increase the stability of hydroxyapatite nanoparticles' suspension by using
triethanolamine (TEA) additive, its effect on the electrophoretic deposition process and the properties of the obtained coatings.