The electrical characteristics that make up
characteristic impedance.
Having derived all the primary parameters of the 3-phase power cable (Table I) its
characteristic impedance and propagation constant were able to be obtained.
The
characteristic impedance at each section of the proposed transition is kept at 50 [OMEGA] to have a wide bandwidth.
One of them calculates the strip width of the coplanar waveguide and the other calculates the sloth width of the coplanar waveguide having a desired
characteristic impedance for a given dielectric substrate material.
where [Z.sub.910] is the
characteristic impedance of TL9 and TL10 and [f.sub.4m-2] is the (4m - 2)th harmonic.
* The terminal branch impedance influences the position of peak and notches and the attenuation of notches significantly decrease with impedance larger or lower than
characteristic impedance of power line.
Specifically, this factor uses the ratio of
characteristic impedances for a non-complementary CPS ([W.sub.CPS] [not equal to] [S.sub.CPS]) to the
characteristic impedance of self-complementary CPS ([W.sub.CPS] = [S.sub.CPS]), where [W.sub.CPS] is the metal width, [S.sub.CPS] is the strip spacing, and the impedance of CPS is given by [36].
The attenuation could also be reduced by a thicker line metallization or by increasing the line width and so decreasing the
characteristic impedance.
This paper proposes a novel modified CRLH structure that has a continuous
characteristic impedance distribution inside the passband, and sharp skirt characteristics in the upper or lower stopband whether the CRLH unit cell is right- or left-handed.
parameters are enhanced and become frequency dependent, we can expect that the
characteristic impedance is also frequency-dependent.
Their topics include the analysis of nonhomogeneous helical systems using electrodynamical methods, calculating
characteristic impedance of multiconductor lines, investigating slow-wave systems with versatile electromagnetic simulation and design tools, applying slow-wave structures to deflect electron beams, and the computer-aided design of electrodynamical delay lines.