Figure 7 shows the S-N data of the 351 alloy samples taken from
cylinder head deck face and high pressure oil line areas.
The aluminum
cylinder head and steel barrel are screwed together with precise fit and tolerances.
The fiber is then molded into the
cylinder head covers by Dana Holding Corp.
During the engine operation, in its
cylinder head occur temperature differences, [1].
Place a small dab of anti-seize compound on the plug threads and hand-thread the plug into the
cylinder head.
They have a legal obligation to repair the damage, including a new
cylinder head if required.
Think about it, if lean of peak insures lower
cylinder head temperatures, why not take off lean of peak?
In operation, the aluminum heads are manually loaded onto the rotating fixture plate over locators that fit into holes on the bottom of the
cylinder head. The fixture is locked in place, and the marking head is actuated to automatically peen mark the six numbers on the bearing cap exterior surfaces.
of Pittsburgh to analyze a solid model that consisted of the
cylinder head and six washers.
In developing its Monomet
cylinder head gasket, STE of Wilhelmshaven, Germany, used a powder coating compound of Victrex PEEK polymer and PTFE (polytetrafluoroethylene) to prevent micro abrasion, contact corrosion, and "welding" of the
cylinder head to the cylinder block.
As part of the new cylinder-head machining area, Ford will install a series of "flexible" computer-numerically controlled (CNC) machines to manufacture the engine's
cylinder head. Ford also will convert its existing flexible manufacturing equipment at Lima to build crankshafts for the new V-6 engine.