The amplitude difference between reflection from
delamination and not defected area is 1 dB.
A different failure mode has occurred when using thicker film material where
delamination occurs during soldering.
The
delamination persists mostly unchanged through Gates 12, 13, and 14, and finally begins to disappear in Gate 1 5.
Effect of
delamination on buckling performance of FRP composite plates.
In this paper, a numerical approach is proposed to localize a
delamination in sandwich skin as presented in Figure 1.
A
delamination crack is, generally, represented by an interfacial entity between two plies of the laminates.
Delamination factor is labelled as Df and it is the percentage difference between the recommended width of the notch and the real width of the notch.
More specifically, the outermost area accounts for the whole extension of
delamination. In fact, as demonstrated in previous work [3], any form of damage (
delamination and/or fibers breakage) is accompanied by heat dissipation, which manifests itself through the appearance of hot spots/areas over the material surface.
S.M Kulkarni et al [5] analyzed drilling induced
delamination in GFRP across various cutting parameters and concluded the optimum cutting parameters obtained using ANOVA and Taguchi methods.
Compared to coatings made with competitive products, hybrid formulations featuring SiVance C2010 resin enable formulators to help their customers avoid the cracking,
delamination and blistering that lead to corrosion and failure of metal pipes, tanks and equipment, according to the company.