The modeled part is the area of contact between the bolt head, the
end plate, and the electrolyte.
Maoka, "Lesions of the lumbar posterior
end plate in children and adolescents.
Hinging open the bearing-free
end plate at the overs/discharge end of the screening chamber allows rapid removal of the unit's internal baffle plate, screen cylinder, and helical paddle/feed screw assembly.
Moment-rotation (M-[PHI]) diagram of the end-plate is obtained by the horizontal displacements (Figure 12) of the two characteristic points of the
end plate.
The most common progressive findings were disk signal loss (10%), progressive facet arthrosis (10%), or increased
end plate changes (4%).
The most favorable method for producing large series components, such as
end plates for electric motors, is by casting.
At this point you can attach the end stiffeners to the inside of the
end plates. Hold the
end plate stiffeners flush with the bottom of the
end plates using wood clamps.
The rubber sleeve is secured to the
end plate through a series of wedging points for a strong and safe attachment even when the rubber is softened by exposure to high temperatures.
A split-control
end plate is a device that is inserted into the end of a railroad crosstie to prevent the formation of new splits or the expansion of existing splits.
Using three thumb screws, the unit's
end plate, cylindrical screen and shaft-mounted paddle assembly can be removed in less than one minute, providing access to sanitize all material contact surfaces.