Both the
hanger bolt and the dowel screw drivers from
Hanger Bolt are designed for use in a reversible power drill.
Drill 1/8-in.-deep holes to mark the
hanger bolt positions using a drill bit that's the same diameter as the saw's mounting holes [Photo 3).
I first took off the front "
hanger bolt" nuts so I could remove the springs'
hanger bolts.
A 3/8 x 4
hanger bolt with bolt threads on one end and wood-screw threads on the other was tapped into the top center of the 8-by-10-inch base board.
Hanger Bolt & Stud's Drill 'n Drive 220 is part of a series of machinery designed to insert
hanger bolts, dowel screws and threaded inserts in production quantities.
7 TURN the
hanger bolt into the pilot hole with a locking pliers clamped around the Wing-Nut (to protect the threads).
The specialized
hanger bolt and dowel insertion drivers from
Hanger Bolt & Stud Co.
Hanger Bolt & Stud's 200 and 300 series Drill 'n Drive systems can be a cost effective solution for low to medium volume bolting of a wide variety of wood components, including table legs, pedestals, feet, bed posts, finials, balusters and fence post balltops, the company says.
