However, the power of two received antennas is decided by antenna angle when
linear polarization antenna is adopted.
The asymmetric transmission phenomenon in
linear polarization converter was firstly observed by Fedotov et al.
Because the maximum contribution to the wave slope is obtained using only
linear polarization, here, we set the ellipticity to zero and so the linearly polarized backscattering cross section at any polarization orientation angle can be derived as [14, 15]:
The specimen with and without Nano Coating was exposed to
Linear Polarization Resistance Test (LPR).
Each system is equipped with two orthogonal receiving channels, which are able to measure vertical and horizontal
linear polarization at the operating frequency in the 5433-5468 MHz range.
In order to producing CP radiation, created some of the methods such as : implementing two inverted-L grounded strips around two opposite corners of the slot [1,8], improvising T-shaped grounded metallic strip, which is orthogonal to the axis of the CPW feed-line [9], using an asymmetrical CPW fed from a corner of the slot with an embedding pair of grounded strips implanted in the slot [12], striped slot antenna with longer fraught [10], utilizing the additional arc-shaped grounded metallic strip for circular and
linear polarization [11], and embedding a firelight shaped feed line and inverted-L grounded strips [3,8] are used in literature.
The report "Corrosion Monitoring Market by Type Technique (Corrosion Coupons, Electrical resistance,
Linear Polarization Resistance, Galvanic, & Ultrasonic Thickness Measurement), End-Use Industry (Oil & Gas, Chemical, Manufacturing) - Global Forecast to 2021", The corrosion monitoring market is expected to reach USD 297.8 Million by 2021, at a CAGR of 9.1% between 2016 and 2021.
Linear polarization technique involved grinding the two surface ends of each specimen with silicon carbide abrasive papers of 80, 120, 220, 800 and 1000 grits before being polished with 6.0 um to 1.0 um diamond paste, washed with distilled water, rinsed with acetone, dried and stored in a dessicator before the test.
The antenna in the Fig.2 was designed with
linear polarization. The antenna was designed to coaxial feed so that the rectifier circuit could be added at the back of the antenna.