Tools and materials : Chop saw, 18v drill driver, hammer 22mm spade bit 3mm counter sink drill bit Tape measure & pencil Hand rails, spindles and newel post kit (will include spacers) Glue,
panel pins, 60mm screws PREP: Start by removing the old spindles.
a lint-free then why do I about cleaning Don't use glass and streak need to screen DONNY'S RELEVANT PRODUCT
Panel pins are small nails and, as the name suggests, almost pins with a small head.
Nail small
panel pins onto a picture rail or into the wall, leaving a centimetre of the nail raised.
Sand the door thoroughly and fit the metal insets behind, using stripwood beading and
panel pins.
Next, cut out your piece of perforated MDF and
panel pin this to the door frame.
In final assembly, interior trim is predominantly attached using trim clips, plastic expanding rivets or push-fit
panel pins. These fasteners have one thing in common: They must be pressed into a pre-drilled hole to connect two components together.
You'll also need the following tools: tape measure; panel saw (even if you've had wood pre-cut, you may need to adjust it); drill with 7mm masonry bit, 5mm high-speed bit & Phillips head screw bit; spirit level (or app); Phillips screwdriver; twopart filler; 60-90 grade sandpaper; scraper; brown Rawlplugs; 5 x 70mm screws; 5 x 50mm screws; 40mm
panel pins; hammer.
You'll also need the following tools: Tape measure; panel saw (even if you've had your wood pre-cut, you may need to adjust it); drill with an 7mm masonry bit, a 5mm highspeed bit & a Phillips head screw bit; spirit level (or app); Phillips screwdriver; two-part filler; 60-90 grade sandpaper; a scraper; Brown Rawlplugs; 5 x 70mm screws; 5 x 50mm screws; 40mm
panel pins; hammer.
The easiest way to fix it is with a nail gun, which is much quicker and easier than hammering in
panel pins.
1 Use timber boards to make the shelves, base, roof and backboard of the bee hotel, sticking them together using
panel pins or wood glue.