Overall, grafted poly(IPA) in the IPA series clearly demonstrates enhancements in breaking
tensile stress, shape recovery, water compatibility, and temperature-sensitive control of water swelling and WVP.
Average tangential
tensile stress in the edge of the circular saw blade is also shown in Table 4.
Meanwhile, the dynamic
tensile stress away from the weld also rises slightly.
In these models, the maximum principal stress (FRD: 1.749 MPa, screwed-FRD: 1.370 MPa, TFBC: 0.686 MPa, and screwed-TFBC: 0.481 MPa) in the palatinal neck of the first upper molar is more active and hence the
tensile stress is observed in the palatinals of the first upper molar teeth.
In the elastic stage, a rising trend of the amplitude variation with the increase in the applied
tensile stress can be observed in the inductive state of the ECS, whereas a declining trend is observed in the capacitive state (Figure 4(a)).
(3) The inner surface of the arch rib web is pulled, and the maximum
tensile stress reaches 1.851 MPa at the age of 30 days, 2.964 MPa after 180 days, and then 3.363 MPa after 3600 days.
It reveals that at minimum value of welding current involves achieving maximum of tensile strength, maximum
tensile stress achieved with maximum value of welding current and welding speed.
The reason may be that the
tensile stress manifested on the inner wall and initially acted on the inner part [18-21].
The maximum
tensile stress that a material can withstand before failure is known as the tensile strength [[sigma].sub.c].