acrylate rubber

acrylate rubber

[′ak·rə‚lāt ′rəb·ər]
(materials)
A member of a class of elastomers based on acrylate esters.
References in periodicals archive ?
0 Tonnes Within The Project Modernization Of Pilot Production Of Siloxane, Fluorosiloxane And Acrylate Monomers, 3,4-Polyisoprene, Low Molecular Weight Hydrocarbon Rubbers Epoksiuretanovyh And Acrylate Rubber, Rubber Compounds And Sealants
By blending an acrylate rubber with the styrene-acrylonitrile rigid phase, to give acrylic-styrene-acrylonitrile (ASA), the weathering resistance is greatly improved, while retaining the other attractive properties of ABS--toughness, high gloss finish, friendly processing and low mould shrinkage.
The former peak is attributed to the [alpha] relaxation of the acrylate rubber and latter peak is due to the [alpha] relaxation of the unmodified epoxy.
Use of mineral filler and acrylate rubber modifiers has successfully produced a high-impact, fast-cycle crystalline matrix product.
SCOPE Acrylate rubber manufacturing Acrylate-butadiene rubber manufacturing Acrylic rubber manufacturing Butadiene copolymers containing more than 50 percent butadiene manufacturing Butadiene rubber (i.
Open Competition: The right to a state contract for construction and installation work at the site fluorosiloxane monomers for the project: Technical re-trial production of siloxane, fluorosiloxane and acrylate monomers, 3,4 polyisoprene, low molecular weight hydrocarbon rubbers; epoksiuretanovyh and acrylate rubber, rubber compounds and sealants Federal State Unitary Enterprise Order of Lenin and Red Banner of Labor Research Institute of Synthetic Rubber Academician SV Lebedev (FSUE NIISK), St.
Acrylate rubber, acrylate rubber/fluoroelastomer/polyacrylate blends, rheological and viscoelastic properties of multiphase blends, 975
Initial grades will be based' on acrylate rubber dispersed in nylon and/or TP polyester matrixes.
Dynamic viscoelastic properties and dynamic mechanical properties of blends of acrylate rubber (ACM), fluoroelastomer and polyacrylate plastics have been investigated with a rheometer (ARES RDA III) at a frequency [omega] range of 0.
Other products available here as imports from Germany are a TPE-O line based on PP modified with acrylate rubber.
The MBS resin is obtained by polymerizing butadiene-based rubber with methyl methacrylate or styrene, and the acrylic MOD is obtained by polymerizing mainly butyl acrylate rubber with methyl methacrylate (BA).
Rubbers studied include natural rubber, styrene butadiene rubber, butyl rubber, polychloroprene, nitrile rubber, acrylate rubber, chlorosulfonated polyethylene, polysulfide rubber and silicone rubber.