aluminum alloy

aluminum alloy

[ə′lüm·ə·nəm ′a‚lȯi]
(metallurgy)
An alloy of aluminum and relatively small amounts of other metals, such as copper, magnesium, or manganese.
References in periodicals archive ?
A new way to create hydrogen for fuel cells was accidentally discovered when water was introduced to a kind of aluminum alloy.
The Micromill process dramatically changes the microstructure of the metal, producing an aluminum alloy that has 40 percent greater formability and 30 percent greater strength than the incumbent automotive aluminum used today while meeting stringent automotive surface quality requirements.
Kaufman presents this research-based discussion of aluminum alloy performance under exposure to fire conditions, given the non-combustibility and overall fire resistance but relatively low melting point of aluminum metal.
The AA 2024-O Aluminum alloy has many advantages of mechanical properties, starting from the weldability and high stiffness or strength/weight ratio which have been confirmed experimentally by many researchers.
ST60-HSM has attained high strength equivalent to A6061** aluminum alloy, while maintaining the same bendability and thermal conductivity as existing grades of ST60 series have.
the project is part of a new initiative from DOE's Vehicle Technologies Office to develop an affordable, high-strength cast aluminum alloy.
Beryllium Aluminum Alloy market is expected to witness a steady growth in its market value during the forecast period.
Tokyo, Oct 28, 2014 - (JCN) - Sumitomo Electric launches its new BreakMaster LD type and GD type sintered diamond cutting tools with integral chipbreaker, which provide outstanding chip control over a wide range of aluminum alloy machining applications, from finishing through semi-finishing.
said Tuesday it will begin an aluminum recycling business in India by setting up a joint venture with major Indian secondary aluminum alloy maker Century Metal Recycling Pvt.
In late 2008, Khaki got in touch with someone in China about obtaining 20 tons of 7075O aluminum alloy 80mm rods and 20 tons of 7075-T6 aluminum alloy 150 mm rods from the United States or Europe.
The results indicated that electroless Ni--P plating could obviously improve the corrosion resistance of 6061 aluminum alloy.
Units incorporate standard features including adjustable travel stops, captive springs (single acting model only), aluminum alloy body and end caps with Cataphoresis and Rilsan coating inside and outside for maximum corrosion resistance, Cataphoresis coated steel output shaft with double o-ring seal on top and bottom, aluminum alloy pistons, nylon piston guides, PTFE and bronze piston guide rings, self-lubricating BUNA-N O-Rings and stainless steel external hardware.