anchor rod

anchor rod

[′aŋ·kər ‚räd]
(civil engineering)

anchor rod

A threaded metal rod used with various types of hangers to support ductwork, piping, etc.
References in periodicals archive ?
1:3:6 or in 100 for erection of anchor rod using 20mm to 25mm size black trap machine crushed metal including shutting and mixing in mixer machine ramming keeping 25mmx75mm size pocket in centre for foundation bolts curing and finishing the exposed hunny combed surface if any etc.
A 1-1/8-inch plastic gas line was severed when workers, drilling a vertical hole to install an anchor for a guy line to support a utility pole, struck a large buried slab of concrete, bending the anchor rod and causing it to strike the gas line.
The anchor rod may have snapped and the ship drifted near the shore where high winds and waves are believed to have swamped the vessel.
Throw away the unused portion of the wick and untape anchor rod from jar.
The anchor rod may have snapped and the ship drifted near shore where high winds and waves are believed to have swamped the vessel.
The anchor rod is a long rod rigged with a large wire and weight "anchor" hook which is cast as far as possible from the pier into deep water.
Tenders are invited for supply of Cement Block of size 24*12*6 with Central hole of size 3 *1 *6 (through out hole) for Anchor Rod as per specification & as per drawing.
Cloud accident happened when a 1 1/8-inch plastic gas line was severed when workers drilling a vertical hole to install an anchor for a guy line to support a utility pole struck a large buried slab of concrete, bending the anchor rod and causing it to strike the gas line.
Investigators believe the 1 1/8-inch plastic gas line was severed when workers drilling a vertical hole to install an anchor for a guy line to support a utility pole struck a large buried slab of rock or concrete, bending the anchor rod and causing it to strike the gas line.
Tenders are invited for Providing Necessary Repair/Replacement Work Of Damaged Turn Buckle Assembly, Including Ss Pins & Bronze Bush Fitting,Rectification To 56 Mm Dia Anchor Rod By Required Nut, Washer Etc Fitting And Replacement Of Old,Rusted/Jammed/Damaged Guide Roller Assembly And Fitting In Proper Position Of Radial Gate Size 9.
Tenders are invited for Strengthening Of Vertical Anchorages Of Anchor Girder Stand By Drilling Concrete Providing- Fitting Of New High Tensile Anchor Fasteners -Nuts & Washers With Injecting Chemical Slurry ,Providing Fitting Additional Anchor Base Plates & Vertical Triangulars Stiffeners , Etc Including Pull Load Testing Of Anchor Rod Of Radial Gate Size-30~X20~-05 Nos.