bleeding

(redirected from arterial bleeding)
Also found in: Dictionary, Thesaurus, Medical, Wikipedia.
Related to arterial bleeding: venous bleeding

bleeding

[′blēd·iŋ]
(chemical engineering)
The undesirable movement of certain components of a plastic material to the surface of a finished article. Also known as migration.
(engineering)
Natural separation of a liquid from a liquid-solid or semisolid mixture; for example, separation of oil from a stored lubricating grease, or water from freshly poured concrete. Also known as bleedout.
(materials)
The outward penetration of a coloring agent from a substrate through the surface coat of paint.
The movement of grout through a pavement from below a road surfacing material to the outer surface.
(textiles)
Referring to a fabric in which the dye is not fast and therefore comes out when the fabric is wet.

bleeding

1. The upward penetration of a coloring pigment from a substrate through a topcoat of paint.
2. The oozing of grout from below a road-surfacing material to the surface in hot weather.
3. Exudation of one or more components of a sealant, with possible absorption by adjacent porous surfaces.
4. The autogenous flow of mixing water within, or its emergence from, newly placed concrete or mortar; caused by the settlement of the solid materials within the mass or by drainage of mixing water; also called water gain.
5. The diffusion of coloring matter through a coating from the substrate, or the discoloration that arises from such a process.
References in periodicals archive ?
Although the arterial bleeding in this model did not mimic a typical coagulopathic bleeding, it provided a standard condition for testing these agents under coagulopathic state, which could be directly compared with the previous results in normal animals.
Army has placed a major order for WoundStat[TM], a powerful agent for controlling arterial bleeding, TraumaCure announced today.
A family of customized, single-use application instruments will enhance the delivery of AMP(TM) to the wound site for the control of capillary, venous and arterial bleeding in both open and minimally invasive surgical procedures.
WoundStat consistently stopped arterial bleeding within seconds, resulted in the least amount of blood loss, and stabilized the wound for several hours.
Only WoundStat was 100 percent effective at stopping high- pressure arterial bleeding in severe wounds.
EVICEL(TM) should not be injected directly into the circulatory system or used for the treatment of severe or brisk arterial bleeding.
EVITHROM* and EVICEL* should not be injected directly into the circulatory system or used for the treatment of severe or brisk arterial bleeding.
RECOTHROM is not to be used for the treatment of massive or brisk arterial bleeding.
The new bandages, which control severe arterial bleeding, are thinner, more flexible and sized differently than the original HemCon military bandage.
EVICEL should not be injected directly into the circulatory system or used for the treatment of severe or brisk arterial bleeding.
When introduced into a wound, this sponge takes the shape of the injury and rapidly stops even severe venous and arterial bleeding.
EVITHROM* should not be injected directly into the circulatory system and should not be used for the treatment of severe or brisk arterial bleeding.