backing plate

backing plate

[′bak·iŋ ‚plāt]
(engineering)
A plate used to support the hardware for the cavity used in plastics injection molding.
References in periodicals archive ?
The simple "Quick-Loc" system consists of lightweight male and female fittings that attach to the butt of the stock and the backing plate of the recoil pad.
ThermoQuiet brake pads integrate highly refined, application-specific friction materials, a backing plate and sound insulator into a high-strength one-piece component that is both easier to install and which delivers an ideal combination of performance characteristics.
Tlam circuit boards feature a thin layer of thermally conductive dielectric material sandwiched between a top layer of standard copper foil and a thick metal backing plate for structural strength and improved heat spreading.
MRC's IntegraBond process utilizes high temperature and pressure to produce a high strength bond between the titanium and a commercial pure-aluminum backing plate.
Limited Tenders are invited for Rubber Block And Backing Plate At Barh
1 End seal leakage: Leakage sometimes results from over tightening, which can deform the backing plate.
The hybrid design provides the best of both worlds: a comfortable backing plate made of lined saddle leather with a Napa leather front combined with a rigid Kydex holster pocket for a fast draw and easy return to the holster.
The particles are attracted to the object or surface by an electrically charged backing plate.
You pick the colours of the frame, the accents, the screws and the backing plate.
Remove the backing plate (usually the "A"-side clamp plate) to gain access to the back side of the manifold.
There's a bit of a light show when you start the car as firing up the ignition illuminates, in succession, first the outer rims of the dials, the needles and then the backing plate in a fetching shade of blue.
The backing plate was loose and the curious kitten had got sucked in.