bevel angle

bevel angle

In welding, the angle which is formed between the prepared edge of a member and a plane perpendicular to the surface of the member.
Mentioned in ?
References in periodicals archive ?
Cutting Edge With Bevel Angle 85 Degree, Cutting Edge Additionally Induction Hardened, Plastic Coated Handle, Range 1.
2] = 0), the reflection coefficient characteristics vary when the bevel angle of the modified U-shaped radiator changes.
We have found that the bevel angle and other edge-profile parametric values can vary widely among wafer suppliers.
The Beast features a variable-speed motor so you can dial in the optimal blade speed for the material you're cutting, maximum cut capacity and unlimited bevel angle adjustment.
You'll get perfect results if you set your saw to a miter angle of 8 degrees from square, and a bevel angle of 15 degrees from square.
The unit features two stages - an electric-powered stage for sharpening and a manual stage for honing - and couples these two stages with precise bevel angle control to provide a super-sharp, arch-shaped edge that is stronger and more durable than conventional "V"-shaped or hollow ground edges, according to EdgeCraft.
Then, a bulb glimmered in some sharp lad's mind and he saw that a longer, gentler bevel angle to get bullets into the barrel with less damage would be much better.
The system's sharpening port provides users with a maintenance-free, easy-to-use method that delivers a precise and repeatable bevel angle of 25[degrees] for chisels and plan irons up to 1-5/8" wide.
Research has shown that the use of a beveled edge, with a bevel angle of 45 [degrees], greatly reduced the control problems attributable to edge drops.
Each blade features 40 brazed carbide tips ground to a steep 20 degree bevel angle for crisp, clean cuts both with and across the grain in plywood and solid wood.
Featuring Chef'sChoice Criss-Cross™ technology, this two-stage sharpener offers 100 percent diamond abrasives and precise bevel angle control.
And don't procrastinate: once you get past a bevel angle of about 40 degrees, you won't be able to hone a sharp edge, regardless of the sharpening system you use.