central processing unit

(redirected from central processors)
Also found in: Dictionary, Thesaurus, Medical.

central processing unit

the part of a computer that performs logical and arithmetical operations on the data as specified in the instructions

Central Processing Unit


the central part of a digital computer. It manipulates the data in accordance with the program instructions and exercises control of the entire computation process and of the interaction between the units of the computer. Often called simply the CPU, it is also known as the central processor or the main frame.

The chief parts of the central processing unit are the arithmetic and logical unit (ALU) and the control unit. The control unit determines the sequence in which the instructions are fetched from the memory, produces control signals, coordinates the work of the computer units, processes program interruption signals, provides memory protection, and monitors and diagnoses the operation of the central processing unit. Arithmetic and logical manipulations of data are performed in the ALU. In addition, the central processing unit usually includes a small-capacity high-speed memory unit called the local memory and a number of units designed to organize the computation process, for example, a memory protection unit and a program interruption unit. The working, or main, storage and the channels for communication with peripheral units are constructed as separate devices, although in a small digital computer they may be structurally connected with the central processing unit and may make partial use of its equipment. The central processing unit functions in close interaction with the software, which is, as it were, a continuation of the processor hardware.

The execution of a program involves the sequential performance, in a given order, of arithmetic and logical operations on the words (numbers, codes) stored in the memory and of actions connected with the organization of the computation process and the evaluation of the results obtained. To each operation there usually corresponds one instruction of the program. The central processing unit can therefore be characterized by the set of instructions it can execute (seeINSTRUCTION CODE). The central processing unit operates in repeating cycles. One cycle consists in fetching the instruction and operands and performing the required operations. The most important characteristic of a central processing unit is its operating speed, that is, the time required to execute an instruction or the average number of instructions executed per unit time. When a program is being executed, the use of slow-working (by comparison with the processor) peripheral data input-output units causes the central processing unit to stand idle. This idle time can be reduced through multiprogramming, wherein two or more programs are executed simultaneously.

Multiprocessing computers have more than one processor. The processors that execute data input-output are called peripheral, in contrast to the central processors. The presence of several processors permits faster execution by a digital computer of a single large program or of several smaller programs, including interrelated programs. The structure of the central processing unit and its basic elements determine which generation a digital computer belongs to.


Flores, I. Organizatsiia vychislitel’nykh mashin. Moscow, 1972. (Translated from English.)
Kagan, B. M., and M. M. Knaevskii. Tsifrovye vychislitel’nye mashiny i sistemy, 2nd ed. Moscow, 1973.
Spravochnik po tsifrovoi vychislitel’noi tekhnike. Edited by B. N. Malinovskii. Kiev, 1974.


central processing unit

[′sen·trəl ′präs‚əs·iŋ ‚yü·nət]
(computer science)
The part of a computer containing the circuits required to interpret and execute the instructions. Abbreviated CPU.

central processing unit

(architecture, processor)
(CPU, processor) The part of a computer which controls all the other parts. Designs vary widely but the CPU generally consists of the control unit, the arithmetic and logic unit (ALU), registers, temporary buffers and various other logic.

The control unit fetches instructions from memory and decodes them to produce signals which control the other parts of the computer. These signals cause it to transfer data between memory and ALU or to activate peripherals to perform input or output.

Various types of memory, including cache, RAM and ROM, are often considered to be part of the CPU, particularly in modern microprocessors where a single integrated circuit may contain one or more processors as well as any or all of the above types of memory. The CPU, and any of these components that are in separate chips, are usually all located on the same printed circuit board, known as the motherboard. This in turn is located in the system unit (sometimes incorrectly referred to as the "CPU").

A parallel computer has several CPUs which may share other resources such as memory and peripherals.

The term "processor" has to some extent replaced "CPU", though RAM and ROM are not logically part of the processor.

List of processors.
References in periodicals archive ?
After a transaction is assigned to single central processor, central processor decides, if it is possible to perform operations of the transaction and return answer to coordinating processor, which waits answers from all nodes of network.
By shifting such large core workloads from a mainframe central processor to low-cost specialty processors, users are able to dramatically reduce the costs of running their core business applications to a mere fraction of what it costs when using central processors.
At a private event to unveil zPrime to some of NEON's customers, early users of the software enthusiastically shared test results that proved zPrime can move major workloads from costly-to-use System z central processors and on to IBM specialty zIIPs and zAAPs that run the workloads as fast or faster than the central processors.
This small package size can put the processor closer to sensors, or offload the overburdened central processors in a broad range of embedded systems.
The MV200i extends the MV200 product family, which offers CPU replacements for LTX CP70, CP80 and CP90 central processors.
The ISC is one of the largest and most sophisticated data centers in the country designed to provide data processing technology through use of the latest central processors, DASD technologies, network communication hardware and software, and operating system software.
Capacity Upgrade on Demand - A component of the Plan-Ahead process that allows for the addition of one or more central processors up to the maximum number of spare processors available in a server.
Tandem's ServerNet technology forms the switching fabric of the high-speed, fault-tolerant interprocessor network, capable of massive bandwidth, over which the central processors communicate.

Full browser ?