The chemical structure of Parylene film contributes to its unique performance capabilities in this and other coating
Since the refractory component of a coating
is heavier than water, coatings
have a lower specific gravity when they are diluted with water from concentrate to application level.
According to Frank McKulka, president, NAFTA II Region, BASF Automotive (Southfield, MI), "This process reduces coating
consumption by 20%, eliminates one step in the process, and reduces the energy necessary to cure the Finish.
For more information on Slide-Lok garage cabinets, garage floor coatings
, garage wall storage, and closets, and their patented and innovative design advantages, contact Slide-Lok at 1-800-835-1759 or www.
They are especially useful on coated board machines to cool the dried precoated sheet before top coating
Session 1 on smart coatings
will include the following presentations: "21st century materials: Coatings
that interact with their environment," Robert F.
The Baume test is the most common test used in foundries to control coating
because it is quick and easy.
The base coat mixes all of the powder we reclaim from the painting process," says Rick Tansey, technical manager at PPG's Automotive Powder Coatings
division, "which makes this painting method very economical.
Another extra-thick roll coating
was developed in the late '80s by F.
After testing by researchers nearly two decades ago, "the coatings
were taken for granted, they were considered history," says Robert A.
In China, coating
is mainly categorized as architectural coating
formulation was a standard offset coating
formulation with 70:30 ratio of fine GCC and fine clay and 12 parts SB latex binder plus additives.