compression process

compression process

[kəm′presh·ən ‚prä·səs]
(chemical engineering)
The recovery of natural gasoline from gas containing a high proportion of hydrocarbons.
References in periodicals archive ?
The order includes delivery systems continuously regulate and control flow control pumping gas by controlling the compression process, establish a work flow diagram for the installation of the delivered systems and supervision during installation and commissioning of the systems that will be installed two number GMQ 10 GKNAM to regulate the amount blown in UGS ~UGS~ natural gas.
Additionally, Digital Sound Enhancement Engine upA[degrees]scales compressed digital music files by restoring the high and lowA[degrees]range sound lost in the compression process, while ClearAudio+ optiA[degrees] mises playback for all tracks.
The GG gas compressors feature a single-stage compression process and are water-cooled, speed-regulated and directly driven.
Figure 1 shows the results obtained from a STAR-CCM+ simulation of pre-compression in a tablet press to determine how to overcome common tablet defects such as capping (splitting of the tablet's upper cap) that often occur as a result of entrapment of air and migration of fine particles during the compression process.
SpA, explained: "We definitely needed an oil-free solution in order to safeguard our product quality and provide great flexibility of use in the compression process.
NDC has developed a new, cost-effective thickness measurement gauging system for battery press lines that can measure and control the calendering compression process.
Compression process advances and at some point, the workpiece is not uniformly deformed appearing the geometry of the barreled specimen.
Sequence 1-2 illustrates the compression process, in which the gas pressure in the compression chamber gradually increases with decreasing volume.
If no password is entered, WinRAR will automatically skip all encoded archives during the compression process.
By way of comparison, it takes several minutes to impregnate comparable components by the RTM process, while, in the gap impregnation process, the entire impregnation and compression process can currently be completed in ten seconds.
One should also take into account that vapours pressure before the compressor shell is higher than the pressure in the cylinder at the beginning of compression process.
The wood also has an attractive shine that is created during the compression process.