(redirected from condenses)
Also found in: Dictionary, Thesaurus, Medical, Legal.


a. an apparatus for reducing gases to their liquid or solid form by the abstraction of heat
b. a device for abstracting heat, as in a refrigeration unit
2. a lens that concentrates light into a small area
3. another name for capacitor


HVAC component used to convert a vapor or gas to a liquid.



a device for changing a substance from its gaseous (vapor) state to its liquid or solid state. condensers are widely used in chemical technology in thermal-power and refrigeration installations to condense the working substance, in evaporation equipment to obtain distillates and to separate vapor mixtures, and elsewhere. The condensation of vapor in a condenser occurs as a result of the contact between the vapor and the surface of a solid (surface condensers) or a liquid (contact condensers) having a lower temperature than the saturation temperature of the vapor at a given pressure. The condensation is accompanied by the liberation of heat previously expended to evaporate the liquid; the heat must be removed by some cooling agent.

Surface condensers are usually constructed as a bank of horizontal or vertical tubes. In this case, the cooling medium (water, brine, air) flows within the tubes and the vapor enters the space between the tubes and condenses on their outer surfaces, or vice versa. The space in which condensation occurs may be at atmospheric pressure or at higher or lower pressures. The design of surface condensers is similar to that of other surface-type heat exchangers (usually of a shell-and-tube design). condensers of this type are used when it is mandatory to preserve the purity of the condensate.

If a liquid is formed upon condensing the vapor, it drains from the heat-transfer surface under the action of gravity or it may be carried away by the moving vapor. If a solid phase is formed (for instance, ice), it is continuously or periodically removed by scrapers or other devices. If air or other gas is used as the cooling medium, the condenser surface exposed to the medium is usually equipped with fins, which are used to increase the rate of heat transfer.

In contact condensers the condensate obtained is mixed with the cooling liquid and is then withdrawn together with the liquid.

Depending on the direction of motion of the vapor and the condensate with respect to each other, there are direct-flow, counter-flow, or crossflow condensers. The condensate is usually removed from the condenser by a pump; the noncondensable gases are sucked out by a vacuum pump. To increase the surface of contact between the vapor and liquid, the liquid in a contact condenser is broken up into jets or drops (by overflow devices, spray plates, spray nozzles). The condensation of vapor then occurs on the surface of such jets or drops. Sometimes the vapor is carried into the volume occupied by the liquid and permeates the liquid in the form of bubbles, on the surface of which condensation occurs. To assure a trouble-free operation, condensers are equipped with a number of auxiliary devices, thus forming a condensing installation.


Shumskii, K. P. Vakuumnye kondensatory khimicheskogo mashinostroeniia. Moscow, 1961.
Kirsanov, I. N. Kondensatsionnye ustanovki Moscow-Leningrad, 1965.
Kasatkin, A. G. Osnovnye protsessy i apparaty khimicheskoi tekhnologii, 8th ed. Moscow, 1971.




a short-focus lens or system of lenses used in optical instruments to illuminate an object being examined or projected. A condenser collects and directs toward the object rays originating at a light source, including rays that would otherwise have missed the object. As a result, the illumination of the object is sharply increased. condensers are used in microscopes, spectral instruments, and various types of projectors (slide projectors, episcopes, photographic enlargers, and so on).

Figure 1. Diagram of a projector with a condenser: (S) light source, (aabb) condenser, (AB) object being projected, (pq) projector objective, (MN) screen. The expansion angle aSa of the rays condensed by the condenser is significantly larger than the expansion angle of the rays incident upon the screen in the absence of a condenser (dotted lines).

The design of a condenser becomes more complex with increasing aperture. For numerical apertures up to 0.1 a single lens is used; for apertures of 0.2–0.3, a two-lens condenser; for apertures greater than 0.3, a three-lens condenser. The most common type of condenser consists of two identical plane-convex lenses whose curved surfaces are facing each other to reduce spherical aberration (see Figure 1). Sometimes the surfaces of condenser lenses have a more complex shape (a paraboloid or ellipsoid).

Figure 2. Diagram of a mirror-lens condenser used in motion-picture projection: (S) light source (electric arc), (M) parabolic mirror, (L) lens, (G) film gate

The resolving power of a microscope increases with an increase in the aperture of its condenser; therefore, microscope condensers are usually built as complex two-lens or three-lens systems. In microscopes and motion-picture projectors, mirror condensers and mirror-lens condensers are widely used. The aperture of such condensers can be very large; the expansion angle 2u of the light beam being condensed can be as great as 240° (Figure 2). Frequently several lenses are used in a condenser, not only be-cause of the desire to increase the aperture but also because of the necessity to provide uniform illumination of the object even in cases where the structure of the light source is nonuniform (see Figure 3).

Figure 3. Diagram of a triple condenser used in spectral instruments: the lens L forms an image S’ of a nonuniform light source S (for ex-ample, an electric arc). The stop D “cuts out” from S’, the uniformly illuminated part, the secondary image S” of which is projected by lens L3 in the plane of the objective O of the spectrograph.


Tudorovskii, A. I. Teoriia opticheskikh priborov, 2nd ed., part 2. Moscow-Leningrad, 1952.


(mechanical engineering)
A heat-transfer device that reduces a thermodynamic fluid from its vapor phase to its liquid phase, such as in a vapor-compression refrigeration plant or in a condensing steam power plant.
A system of lenses or mirrors in an optical projection system, which gathers as much of the light from the source as possible and directs it through the projection lens.


A heat-exchange device in a refrigeration system; consists of a vessel or arrangement of pipes or tubing in which refrigerant vapor is liquefied (condensed) by the removal of heat.
References in classic literature ?
Such experience, to him (to use a trite simile), will be like the storm to the oak, which, though it may scatter the leaves, and snap the smaller branches, serves but to rivet the roots, and to harden and condense the fibres of the tree.
When working at peak efficiency, the water vapor produced in the combustion process condenses, but the condensate is acidic, with a pH level of 4 to 5, making it corrosive.
So we went to our laboratory at Goddard where we vaporize material in a vacuum and observe how it condenses to see what we were missing.
When warm water vapor in the air comes into contact with cool surfaces like glass lenses and windows, the moist air often condenses into liquid droplets on the surface.
In recycling architectural fragments, Pernice condenses the grimy reality of mass transit into forms that quote its structures.
When the interior is cool and dry, and the exterior is warm and moist, water condenses under the vinyl wallcovering, resulting in an explosion of mold growth.
The wet tensile test is designed to imitate this casting condition and provide strength information from the wet layer where the steam developed from the casting process condenses.