Tenders are invited for 1 ea, 48" cone valve
, class 150, manual-operated for modulating service, flanged, ductile iron body, plug, and head cover, stainless steel fasteners, monel seats, fully-skirted plug, one-piece body, bearing grease fittings, anti-cavitation trim, epoxy coating internally and externally, manual actuator, extension stems, guide stems, indicating floorstand, and appurtenances.
Like a cone valve
, a slide-gate valve is a passive system--i.
We exhibited a number of pop-ups and a Smart Drum with a Cone Valve
, but the show stealer was our factory model.
Matcon in Worcestershire, England, with sales offices worldwide provides solutions for high value powders used to manufacture pharmaceuticals, food, plastics and fine chemicals and its products include the original cone valve
powder discharge system and filling, mixing and packaging systems that maintains clean, reliable and repeatable formulations of prepackaged foods and pharmaceuticals, the company said.
Pictured on these pages are just a few illustrations of continuous feed applications using the Matcon cone valve
The flow coefficient for the cone valve
investigated with R-744 shows a constant trend in Figure 7.
Using Matcon's patented discharger/valve principle, each IBC has an in-bin cone valve
at its discharge outlet.
ISL Cone-Valve Technology has opened test laboratories equipped with full size bulk handling equipment, including ISL's cone valve
A cone valve
upgrade solution has been developed and is said to quickly replace older cone valve
technology in existing facilities.
The ISL Cone Valve
is double sealed to prevent tipping or leaking during transport and can be easily secured for tumble blending.
The technology brought a new dimension to powder handling and formed the foundation for the extensive product range that exists today, as the cone valve
technology has been incorporated into MATCON Intermediate Bulk Container Process Systems.
For example, a cone valve
attached to the discharge of a centrifugal pump may be so connected that it functions and serves as a check valve, closing when the pump stops; then, when the operator starts the pump, the valve stays closed while the pump is building up pressure, gradually opening to the full diameter of the pipe as the pump pressure reaches that of the rising main; and when the pump stops, the valve closes at a diminishing rate so water hammer is reduced to a minimum, avoiding damage.