conventional milling

conventional milling

[kən′ven·chən·əl ′mil·iŋ]
(metallurgy)
Milling in which the cutter and feed move in opposite directions from the point of contact.
Mentioned in ?
References in periodicals archive ?
Tenders are invited for Conventional milling machine
Marathon planning also includes advanced environmental studies for future mine permitting and additional metallurgical work to optimize recoveries for conventional milling and heap leaching.
Hence, 3D printing this motorbike allowed for a branched hollow structure for the frame thus making it light, which otherwise would not have been possible with conventional milling or welding.
In doing so, Rutland says it managed to produce jigs and fixtures with exceptional surface finish and intricate detail, benefits that were unattainable via conventional milling machines.
The operation comprises a highgrade, epithermal silver and gold deposit, along with a 3,000 tpd conventional milling facility.
At its Copler mine in Turkey, the company plans to construct a conventional milling and CIL operation which will process higher-grade material with materially improved recovery for three years and then re-process heap leaching material for another five years.
The district has seen "historical conventional open pit mine development and conventional milling in the past," Dewey-Burdock will be the first in situ recovery uranium project licensed, not just in the Edgemont District, but also in South Dakota, Powertech Uranium reports.
Again, different research studies can be found on these processes applying either conventional milling, or High Speed Milling (HSM), or laser milling, or AWJM [ 1,3,6,7].
The alternative of producing a copper concentrate via a conventional milling and flotation circuit and stockpiling the sulphide rich tailings for later processing will also be investigated.
In conventional milling, where a material layer is removed on each pass, the spindle receives most of the radial forces.
A three-year grant followed, enabling the researchers to improve the technology and probe the radical differences between micromachining and conventional milling.
The main difference between tangential and conventional milling is orientation of the insert (see page 18).

Full browser ?