cut methods

cut methods

[′kət ‚meth·əds]
(systems engineering)
Methods of solving integer programming problems that employ cut constraints derived from the original problem.
References in periodicals archive ?
The association has been marred by doping scandals, with many admitting that it is the coaches from east Europe who are helping Indian athletes take up short- cut methods.
According to the company, the speed of a wheel trencher allows it to replace anywhere from 4 to 10 backhoes for open cut methods.
Unfortunately, the ground conditions in the area do not allow our contractor to utilise underground trenchless methods of construction and the pipeline will have to be laid using open cut methods.
This line would be constructed by trenchless and open cut methods and includes a railroad and highway (Highway 303) utility crossings.
The permitting process is underway, and the joint venture expects to begin mining this year, using open pit - open cut methods.
The Work includes: This project consists of rehabilitation of existing sanitary sewer facilities in approximately 33 locations generally located in the south-central portion of Las Vegas valley, including: repair and line 63 existing manholes, line 9 existing manholes, removal and replacement of 34 manholes, of which 19 are lined, installation of 11 manholes, 8 of which are lined, removal and replacement of approximately 6340 ft of sewer pipe in sizes of 8 inch through 21 inch diameter using open cut methods, installation of approximately 940 ft of sewer pipe in sizes of 8 through 15 inch diameter using open cut methods, installation of 125 ft of 8 and 12 inch sewer pipe using jack and bore methods, and lining of approximately 1020 ft of 12 and 15 inch diameter existing sewer pipe.
The new tunnel is an option to installing a replacement force main using open cut methods.
As we stand, the deposit has been defined to feasibility study standards and can be mined by low cost open cut methods.
sanitary sewer using open cut methods to connect the lift station to an existing forcemain
According to Paster, "We're excited about the new microtunneling division and feel that it will be an area of growth for the company in the years to come as construction owners, engineers and managers are recommending more and more that contractors use non-open cut methods for pipe installation on various projects to limit disruption.