cutting list

cutting list

A tabulation of the dimensions of wooden pieces or timbers required for a particular job.
References in periodicals archive ?
The study also found that the goal-seeking model can balance the production rates for each part on the cutting list over the production run.
In the case of the swing the following page begins with a table outlining materials, hardware, cutting list for the wood and a note on materials explaining why specific hardware to be used to hang the swing is not provided.
In the month where Ford regained some its lost market share after cutting list prices by up to 13 per cent, Renault, Fiat and Peugeot have seen a significant fall in consumer interest as they continue to hold onto their existing price structures.
It announced it was cutting list prices by up to 15 per cent.
MG Rover put itself at the centre of the car discount battle yesterday, cutting list prices by as much as 19 per cent.
These include the desired piece lengths, quantities, values, and priorities in the cutting list.
First, make out a cutting list according to the size of box you require.
The doctor said hospitals might have to abandon waiting list work - sacrificing the Government's objective of cutting list sizes - if the pressure continued.
This device is capable of identifying multiple infeed widths and provides the following functions: selection of a specific cutting list according to the width of the timber; cutting the number of pieces required to cover a given surface area; and ensuring total reliability of the information provided by the numerical control, such as cubic feet produced or cubic feet remaining.
The cutting list for this cabinet is: two shelves at 512mm x 300mm, four sides at 582mm x 500mm, one 540mm x 1180mm top piece, two bottoms lengths (each 514mm x 500mm) one skirting at 100mm x 1200mm, two skirtings at 100mm x 550mm, four doors (each 272mm x 495mm) one back at 1100mm x 582mm and four brass grill pieces at 130mm x 390mm.
This device is capable of identifying multiple infeed widths and provides the following functions: selection of a specific cutting list according to the width of the timber; cutting the number of pieces required to cover a given surface area and ensuring total reliability of the information provided by the numerical control, such as cubic feet produced or cubic feet remaining.
The system can cut and handle up to three different grades within the same cutting list.