cycle timer

cycle timer

[′sī·kəl ‚tīm·ər]
(electronics)
A timer that opens or closes circuits according to a predetermined schedule.
Mentioned in ?
References in periodicals archive ?
The 993K Vital Information System (VIMS 3G) which allows real-time assessment of machine performance and includes an advanced Payload Control System that enables on-the-go weighing and payload recordkeeping now includes a Cycle Timer feature that tracks and stores all aspects of the truck loading cycle in an eight-segment format.
A dust collector will typically activate based on a repeat cycle timer or on the pressure differential in the fan stream.
Loading cycle timer is adjustable for variations in materials and conveying distances and is located inside the panel to minimize accidental readjustment.
For injection molding applications, the closed-loop control has a cycle timer that compensates for variations in the machine's screw rotation interval, AEC says.
Overall cycle timer or mold-open timer is available and works in semi-automatic mode.
Start/stop/ speed controls, speed and load displays, temperature display, cycle timer, vacuum pump on/off controls and emergency stop are all accessible from the panel and multiple mobile devices.
Pump Genius software monitors the operating hours of all the pumps in the system, adding and subtracting pumps as demand changes, all without the need for setting a cycle timer.
Smart Bulb Cycle Timer (TM) turns on every day at a chosen time, stays on for 6-hours, goes off for 18, comes back on the next day at the chosen time.
It features a full electronic Control/Information System for optimum operation, including blade drive amps during operation, blade life, cycle timer, piece counter, digital blade speed readout, and diagnostics.
A complete control panel is also provided and includes a frequency inverter to control blade speeds, a batch cycle timer and temperature indication.
In addition, it has a digital cycle timer that will automate the defrost and hold cycles.
When the cycle timer times out, the mold is completely dry and ready for closing.